Caring For Filters; Cleaning Metal Grease Filters - Faber Cylindra CYLN15SS600 Instrucciones De Instalación Información De Uso Y Cuidado

CARING FOR FILTERS

CLEANING METAL GREASE FILTERS

These can be washed in the dishwasher, and need to be cleaned whenever the
S1 Led comes on or at least once every 2 months of use, or more frequently
if use is particularly intensive.
Resetting the Grease Filter Alarm
1. Turn the Lights and the Hood off.
2. Press
times in confirmation.
L T1 T2
Cleaning the Filters
1. Open the Panel.
2. Remove the Filters one at a time, pushing them towards the back of
the unit and at the same time pulling downward.
3. Wash the Filters without bending them, and leave them to dry
completely before replacing. (If the surface of the filter changes color
as time goes by, this will have absolutely no effect on the efficiency
of the filter itself.)
4. Replace the grease filters, taking care to ensure that the handle faces
forward.
5. Completely dry the filters before reinstalling. Otherwise left over
grease may heat and drip.
6. Close the Panel.
34
S1
and hold for at least 3 seconds, until LED flashes three
T3 T4
Z