Particular Warnings; Product Description; Pumped Liquids; Figure 1: Pumped Liquids, Warnings And Operating Conditions - DAB EVOSTA2 Instrucciones Para La Instalación Y El Mantenimiento

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

2.3

Particular warnings

Always switch off the mains power supply before working on the electrical or
mechanical part of the system. Wait for the warning lights on the control panel to go
out before opening the appliance. The capacitor of the direct current intermediate
circuit remains charged with dangerously high voltage even after the mains power has
been turned off.
Only firmly cabled mains connections are admissible. The appliance must be earthed
(IEC 536 class 1, NEC and other applicable standards).
Mains terminals and motor terminals may still have dangerous voltage when the motor
is stopped.
If the power cable is damaged, it must be replaced by the technical assistance service
or by qualified personnel, so as to avoid any risk.

3. PRODUCT DESCRIPTION

The circulators in the EVOSTA2, EVOSTA2d series represent a complete range of circulators.
These installation and operating instructions describe EVOSTA2, EVOSTA2d models. The type of model is
indicated on the pack and on the identification plate.
The table below shows the EVOSTA2, EVOSTA2d models with built-in functions and features.
Functions/features
Proportional pressure
Constant pressure
Constant curve
Dry-running protection
Automatic degassing

4. PUMPED LIQUIDS

Clean, free from solids and mineral oils, not viscous, chemically neutral, close to the properties of water (max.
glycol contents 30%).

Figure 1: Pumped liquids, warnings and operating conditions

Table 1: Functions

ENGLISH
EVOSTA 2
3
EVOSTA 2d
Tabla de contenido
loading

Este manual también es adecuado para:

Evosta2dEvosta2 range

Tabla de contenido