Diamond OASI 8M BM/LUX Manual De Instrucciones página 4

Operator's guide:
1. Unpacking instructions
2. Opening the protective cover
3. Cleaning the internal basin
I
4. Cleaning the cover and external parts
5. Holders for containers
UK
6. Plate-holder
7. Filling and emptying the basin
D
8. Connection to the mains
9. Controls
E
10. Checking correct operation
F
! WARNINGS
NL
It is most important that this instruction booklet is kept together with the appliance both for future
reference and for reasons of safety.
P
1. Adults should operate this appliance only. Do not allow children to use the controls or play with it. 2
is forbidden to modify in any way the main functions and characteristics of this appliance. . The electrical
S
installation of the appliance should be carried out by a qualified electrician or other competent person.
. Never attempt to carry out repairs unassisted. Inexpert repairs can cause serious damage and
4
DK
malfunction. . Assistance has to be provided by an authorized engineer only. Always use original spare
parts. . This appliance is not suitable for the storage of basic commodities not including food-stuffs. 6
FIN
7 . The manufacturers of this appliance accept no responsibility for the consequences of misuse in
contravention of these safety instructions. It further reserves the right to carry out improvements without
prior notice.8
B
sources of heat, such as radiators, stoves, etc.
least 30 cm.
GR
12 . If damp air or products to be refrigerated should cause ice to form on the evaporator, we recommend
stopping the compressor and placing the goods in special refrigerated containers, kept at the same
CZ
temperature, until defrosting is completed;if this is not carried out the compressor will continue to operate
leading to a wasteful consumption of electricity and poor performance.
EE
and unused, it is indispensable to keep the door open at least 10 cm.
LV
LT
1. UNPACKING INSTRUCTIONS
H
CARDBOARD BOXES 1a
WOODEN CRATES 1b.
M
between the appliance and pallet or crate. . Lift the appliance. . Remove the pallet or crate.
the appliance on a flat, level surface. . Make sure there is nothing left in the package before disposing of
PL
it. . Sort out the packaging materials in order to facilitate disposal. . The appliance can be locked in 7
place by engaging the wheel brakes (see fig. 1).
SK
2. OPENING THE PROTECTIVE COVER
SLO
1 . Plug the machine into the power supply socket, as described in Chapter 8.
electric lifting system
3. CLEANING THE INTERNAL BASIN
1 . Remove the protective film from the stainless steel parts.
neutral detergents.
4. Open the tap located on one of the machine's sides to drain any residual water (see fig. 3).
4. CLEANING THE COVER AND EXTERNAL PARTS
1. Never use detergents containing alcohol or solvents which would irremediably damage the cover,
compromising its transparency.
concerned, use proprietary detergents especially designed for wooden surfaces, which are water-based
and do not contain solvents. . Dry with a clean cloth.
5. HOLDERS FOR CONTAINERS
1. Remove the protective film from the holders.
transverse holders. Different arrangements are available for different container sizes and positions.
3. Position the containers in accordance to your requirements (see fig. 4).
6. PLATE-HOLDER M LUX
Fasten the shelves to the outer cabinet, by tightening the screws inside the holes provided for this
purpose (see fig. 5).
All manuals and user guides at all-guides.com
5
. Avoid installing the cabinet directly in line with sunlight. . Nevere install the appliance near
11 .Ensure that the products displayed on the shelves and grills do not hang over the edges.
. Cut surrounding tape. Remove the cardboard package by sliding it upwards.
Remove the nails from the wooden crate with care
6
(A) to position II until the cover is fully open (see fig. 2).
3. Remove obstructions in front of the float hole
2. Use only a soft damp sponge.
4
version
Operator's guide
Maintenance manual (Page 48):
1. Cleaning the bain-marie basin
2. Replacement of the lamps
3. Replacement of the cover's lifting motor
4. Wiring diagram diagram of refrigeration unit
10 . Keep the ventilation grills free from obstruction for at
3 4
2. Clean the basin with a soft sponge and
3.
2. Place the intermediate holders in the slots on the
6
3
9
13 . If the appliance is not working
. 2 . Insert forks of forklift truck
8
2 . Turn the switch of the
(A) and the drainage hole
As far as the wooden surfaces are
. It
5. Place
(B).