Chicco ENJOY FUN Instrucciones De Uso página 19

Ocultar thumbs Ver también para ENJOY FUN:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
similar sources of heat.
• WARNING: If you purchase a
mattress separately, ensure
that it can be fi tted correctly
to the carrycot. Do not use
mattresses higher than 10
mm.
• WARNING: Do not leave in
the carrycot objects that may
reduce its depth.
• WARNING: This carrycot can
only be used with the CHIC-
CO strollers fi tted with the
CLIK CLAK system. Ensure
that the carrycot is fi tted cor-
rectly onto the stroller before
placing the child into it.
• WARNING: Keep all plastic
bags out of children's reach to
avoid the risk of suffocation.
• WARNING: Products left in
the sun may become very hot.
Let the carrycot cool down
before sitting your child in it.
• WARNING: Never leave your
child unattended.
• WARNING: Never use the car-
rycot with a trestle.
• WARNING: Do not let your
baby sleep in the carrycot
for long periods of time: this
product is not intended to re-
place a cot.
WARNING: When used as a
pram body, remember that:
• The depth of the pram body
measured frrom the top of the
mattress to the top of the side
of the body at, or at any posi-
All manuals and user guides at all-guides.com
19
tion within 300mm from, the
harness attachment points,
should not be reduced to less
than 140mm when the mat-
tress is in position;
• The matress purchased sepa-
rately should conform to BS
1877 : Part 10.
TIPS FOR CLEANING AND MAINTE-
NANCE
This product requires periodic maintenance.
The cleaning and maintenance operations must
only be carried out by an adult.
CLEANING
Clean all the fabric parts with a damp sponge
and neutral detergent, complying with the
indications on the label. Use a soft cloth to clean
the plastic parts on a regular basis. Always dry
any metal parts that come into contact with
water to prevent the formation of rust.
MAINTENANCE
Lubricate only if necessary, with a light appli-
cation of a silicone based lubricant between
the components. Always dry the metal parts
to prevent the formation of rust. Do not soak in
water. Use a soft cloth to clean the plastic parts
on a regular basis. Remove all dust and sand
from the parts that attach the carrycot to the
pram, to avoid all friction. Never leave the pro-
duct exposed to direct sunlight for long periods
of time; this could discolour the fabrics.
CARRYCOT CHARACTERISTICS
INTERNAL LINING
1 – To fi t the internal lining inside the carrycot:
fasten the eyelets in the fabric to the side hooks
(diagram 1 ).
2 – Then fi t the fabric where the baby's head
(diagram 2A) and feet (diagram 2B) will lie.
SUNHOOD
The carrycot is fi tted with its own sun and
wind hood that can be adjusted to various
positions.
Tabla de contenido
loading

Tabla de contenido