La-Z-Boy Home Theater Motion-Modular Instrucciones De Operación página 9

La-Z-Time
Assembly Instructions:
Assembly Instructions for La-Z-Time
Modular units with metal base rails have one locking latch bracket and one
latch bracket on the right side (sitting) of modular units without right side arms,
and two stud mounts with threaded studs on the left side (sitting) of modular
units without left side arms (F
IGURE
Modular units with wood legs have one side mount locking latch bracket and
one side mount latch bracket on the right side (sitting) of modular units without
right side arms, and two threaded studs on the left side (sitting) of modular units
without left side arms (F 7).
IGURE
CAUTION-The purpose of the latch bracket system is to connect
the units and prevent them from being separated. The latch
bracket system does not provide adequate structural suppor t for
the movement of latched units. Do not move the units while
latched together, damage may occur.
4. Use a T-30 torx driver to loosen the threaded studs to approximately 1", this
measurement may var y depending on the fabric and style (F
threaded studs are located on the left side (sitting) of modular units without
left side arms.
5. Align the units to be joined next to each other. Move the unit with the latch
brackets approximately 4" forward of the unit with the threaded studs. The
latch brackets are located on the right side (sitting) of modular units without
right side arms.
6. Slide the unit with the latch brackets back until the threaded studs are
securely engaged in both the front and rear latch brackets. The rear bracket
is not a locking bracket.
NOTE: Due to variations in upholster y and style the threaded stud length
may need to be adjusted to fit into the latch brackets. Loosen or tighten the
threaded studs to provide adequate clearance.
7. Continue connecting the modular units until all have been securely joined.
8. All modular units must be disconnected to safely move the modular group.
To disconnect the units, apply pressure to the swing arm of the locking latch
bracket (F 9) and slide the unit forward. Repeat this step to disconnect
IGURE
the remaining units.
16
® Home Theater
Modular Units ( Continued )
®
6).
IGURE
F
IGURE
Latch Bracket
Locking Latch
Bracket
8). The
F
IGURE
Side
Mount
Latch
Bracket
Side Mount
Locking
Latch
Bracket
F
IGURE
Threaded
Stud
"
1
Stud
Mount
Base Units
La-Z-Time ® Home Theater
Assembly Details:
6
7
8
F
IGURE
Threaded Locking Latch
Stud
Bracket
"
1
Leg Units
Threaded
Stud
Stud
Mount
Threaded
Stud
9
Side Mount Locking
Latch Bracket
Base Units
Leg Units
17