Operation; Transport; Storage; Maintenance And Care - Kärcher NT 72/2 Eco Tc Manual De Instrucciones

Ocultar thumbs Ver también para NT 72/2 Eco Tc:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

General
If wet dirt is vacuumed with the uphol-
stery or crevice nozzle or if water is
sucked up from a container it is recom-
mended to deactivate the "Filter De-
dusting" function.
If the maximum liquid level is reached
the appliance will turn off automatically.
In case of non-conductive liquids
(such as emulsion drilling fluids,
oils, and greases) the appliance is
not turned off when the container is
full. The filling level must be continu-
ously monitored and the container
must be emptied in time.
After the wet vacuuming: Clean the flat
folded filter with the filter cleaning.
Clean the electrodes with a brush.
Clean the container with a damp rag
and dry it.
Clip connection
Illustration
The suction hose is equipped with a clip
system. All C-40/C-DN-40 accessories can
be connected.

Operation

Turning on the Appliance
 Plug in the main plug.
 Switch on the appliance at the main
switch.
Filter dedusting
Note: A filter dedusting every 5 to 10 min-
utes will increase the life of the flat folded
filter.
Switch off filter dedusting:
 Push the slide upward.
Switch on filter dedusting:
 Push the slide downward.
Illustration
 Press and hold the switch on the handle
for several seconds while the filter
cleaning is turned on. The flat folded fil-
ter is automatically cleaned through an
air jet (pulsating sound).
Height adjustment of the floor noz-
 Turn the adjustment screw in a clock-
wise direction: High position of the floor
nozzle
 Turn the adjustment screw in an anti-
clockwise direction: Low position of the
floor nozzle
Turn off the appliance
 Switch off the appliance at the main
switch.
 Pull out the mains plug.
After each operation
 Empty the container.
 Vacuum and wipe the appliance inside
and outside with a damp cloth.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 Remove the suction pipe with the floor
nozzle from the holder. Hold the appli-
ance at the handle and at the suction
pipe to transport it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Maintenance and care

Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
– 3
EN
zle

Transport

Storage

7
Tabla de contenido
loading

Tabla de contenido