Maintenance; Fireplace Surface Cleaning - Dimplex BLF7451 Manual Del Usuario

Maintenance

 W ARNING: Disconnect power
and allow heater to cool before
attempting any maintenance or
cleaning to reduce the risk of
fire, electric shock or damage to
persons.
!
NOTE: The fireplace should not
be operated with an accumulation
of dust or dirt on or in the unit,
as this can cause a build up of
heat and eventual damage. For
this reason the heater must be
inspected regularly, depending
upon conditions and at least at
yearly intervals.
Partially Reflective Glass
Cleaning
The partially reflective glass is
cleaned in the factory during the
assembly operation. During shipment,
installation, handling, etc., the
partially reflective glass may collect
dust particles; these can be removed
by dusting lightly with a clean dry
cloth.
To remove fingerprints or other
marks, the partially reflective glass
can be cleaned with a damp cloth.
The partially reflective glass should
be completely dried with a lint
free cloth to prevent water spots.
To prevent scratching, do not use
abrasive cleaners.

Fireplace Surface Cleaning

Use only a damp cloth to clean
painted surfaces of the fireplace. Do
not use abrasive cleaners.
Servicing
Except for installation and cleaning
described in this manual, an
authorized service representative
should perform any other servicing.
17