geberit AquaClean Tuma Comfort Instructions De Montage página 23

Activating the remote control
Prerequisite
– The device is switched on.
– The LED on the lateral control panel does not
light up. Economy mode is active.
4
Insert battery.
Result
ü The device beeps (1x).
ü The LED on the lateral control panel lights up
blue for several seconds.
If several devices of the same type are
installed in immediate proximity (e.g. in
hotels), remote control must be assigned.
If the device does not beep and the LED on
the lateral control panel does not light up
blue for several seconds, then the remote
control must be re-assigned.
Re-assigning the remote control
If the device cannot be controlled using the remote
control, then the remote control must be re-assigned.
4
Simultaneously press the <+> button on the
remote control and the <+> button on the
lateral control panel for around ten seconds.
Result
ü The device beeps (1x).
ü The LED on the lateral control panel lights up
blue for several seconds.
18014400418479371-1 © 05-2017
967.305.00.0 (01)
Testing the remote control
Prerequisite
– The remote control has been set up.
– A hand is placed flat on the marked position of
the WC seat.
– The LED on the lateral control panel lights up
blue and the odour extraction unit runs. A user is
detected.
1
Press the <Shower> button briefly in order
to start the anal shower with oscillating
function.
ü The device performs a shower cycle.
A shower cycle ends after 50 seconds. If
required, restart the shower cycle.
EN
23