Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OWHER'SRESPOHSIBILITIES
Follow the hourly or calendar inteHals,whichever occurs
first. More frequent service is required when operating in
adverse conditions noted below.
* Changeengine oil
* Check/clean water inlet screen'
Check high pressure hose
Checkdetergent siphoning hose
Checkspray gun and assembly for leaks
Cleandebris
Checkengine oil level
Cleanengine air cleaner2
Changeengine oiF
Check/adjust spark plug
Inspect muffler and spark arrester
Check/adjust idle speeds
Check/adjust valve clearance s
* Cleanfuel tank & filter s
* Cleancombustion chambers
* Replace engine air cleaner
* Replace spark plug
Checkfuel tubes (Replace if necessary)
' Clean if clogged. Replace if perforated or torn.
2 Service more often under dirty or dusty conditions.
s These items should be serviced by your servicing dealer.
GeneralBecommendaUons
Regular maintenancewill improve the performance and
extend the life of the pressure washer. See any Sears or
other qualified service dealer for service.
The pressure washer warranty does not cover items that
have been subjected to operator abuse or negligence. To
receive full value from the warranty, the operator must
maintain pressure washer as instructed in this manual
including proper storage as detailed in Storage.
Some adjustments will need to be made periodically to
properly maintain your pressure washer.
All service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedulechart above.
NOTICE Once a year you should clean or replacethe spark
plug and replacethe air filter. A new spark plug and clean air
filter assure proper fuel-air mixture and help your engine run
better and last longer.
Pump Oil
DONOT attempt any oil maintenanceon this pump. The
pump is pre-iubricated and sealed from the factory, requiring
no additional maintenance for the life of the pump.
Emissions Control
Maintenance, replacement, or repair of the emissions
controldevices and systemsmay be performedby any non-
road engine repair establishment or individual. However,
to obtain "no charge" emissions control service, the work
must be performed by a factory authorized dealer. Seethe
Emissions Warranty.
Before Each Use
1.
Checkengine oil level.
2.
Cleandebris.
3.
Checkwater inlet screen for damage.
4.
Checkhigh pressure hose for leaks.
5.
Checkgun and nozzle extension assembly for leaks.
6.
Purge pump of air and contaminants.
17
Tabla de contenido
