Water Unit, Assistant Element; Swiveling The Cuspidor; Adjusting The Water Quantity; Amalgam Rotor - Sirona C1+ Instrucciones De Uso

13 Water unit, assistant element

13.1 Swiveling the cuspidor

13
Water unit, assistant element
13.1
Swiveling the cuspidor
13.2

Adjusting the water quantity

13.3

Amalgam rotor

C
# Amalgam
46
C
12:30 Desinf.
The cuspidor on the water unit can be swiveled manually
by approx. 110mm in the direction of the patient chair.
Collision protection
All chair movements are locked with the cuspidor swiv-
eled in. If a programmed movement is started, then the
cuspidor first moves back into its starting position before
the chair moves into the programmed position. When a
key for the individual adjustment of the chair is actuated,
the cuspidor also swivels back first and, if the corre-
sponding key is still pressed then, the chair will move. If
the cuspidor is swung in during the chair movement,
then the program aborts.
The control for the water amount for the circular flushing
is adjusted by the service engineer during installation.
The indication Amalgam appears if the amalgam rotor
must be exchanged (see maintenance instructions).
A continuous sound indicates that the rotor is full and
no longer functioning properly.
An interval tone indicates an error. The water supply is
interrupted.
Switch the unit OFF and then ON again. If the error still
appears even after the system has been switched OFF
and ON several times, please call your service engineer.
NOTE: The rotor inside the amalgam separator must be
replaced at least once a year, even if the Amalgam dis-
play does not light up; otherwise, unpleasant odors can
develop.
Sirona Dental Systems GmbH
59 06 446 D 3386
D 3386.201.01.08.02