Function Of Keys, Right Row - Sirona C1+ Instrucciones De Uso

15 Basic setting dialog 1

15.2 Function of keys, right row:

15.2
Function of keys, right row:
56
3
# #
3
0
Adjustment of the unit lamp
Setting of the lamp reflector voltage adaptation value,
e.g. 3 (may be set only by the service engineer).
Call key:
Function as switch / button.
Depends on the activated function. Connected and set
by your service engineer during installation of the unit.
The setting may only be changed by your service
engineer!
Setting the suction power:
The setting can be made separately for the suction hose
and saliva ejector hose. If both suction handpieces are
used at the same time, the suction power of the suction
hose always has priority.
Setting: Remove the suction or saliva ejector hose.
A bold frame around the symbol indicates that maxi-
mum suction power is set.
If the suction power needs to be reduced, actuate the
key until the known setting dialog appears.
In this program, the suction power can be adjusted in 3
steps by actuating the –/+ keys (symbol with normal
frame).
When the hose is put back in its receptacle, the suction
power setting is programmed.
Surgery (NaCl) preselection keys
(with additional equipment NaCl cooling)
e.g. with instrument in receptacle 3
0 = without saline solution
2 - 6 are receptacles on the dentist element from left to
right (see page page 76). All instruments must be
deposited in their receptacles!
Sirona Dental Systems GmbH
59 06 446 D 3386
D 3386.201.01.08.02