Preliminary Operations - Sun Blizzard Qtech III Manual De Instrucciones

PRELIMINARY OPERATIONS

- Check that the main switch (ref.1, Fig.11) is set to O. Connect the machine to the
electrical supply and switch on.
- At the startup the display show the name of the machine, sw version, ad date of
release:
- Then the DATA MENU is visualized for 10 seconds (to exit earlier from this menu press
BACK):
- The user can verify the all data of the machine :
Check that the OIL, and UV containers aren't empty, if necessary operate the
substitution as described in ORDINARY MAINTENANCE section.
Check that the oil level in the used oil container is < 200 cc, if necessary empty it
as described in ORDINARY MAINTENANCE section.
Check on the machine display that there are at roughly 2 kg of refrigerant in the
bottle. Should this not be the case, fill the on-board machine bottle from an
external bottle of appropriate refrigerant following the procedure described in the
BOTTLE FILLING (ORDINARY MAINTENANCE)
INSTRUCTIONS MANUAL
FIG. 11
SW v.00.01.84
R134a
Bottle refrigerant
Total: 3070g
Available: 1070g
Ambient temperature
Bottle temperature
Bottle pressure
A/C pressure
-31-
1
DATA
UV
OIL Used