Idiomas disponibles
Idiomas disponibles
Remove all rings, watches and jewelry before doing any electrical work.
To prevent accidental personal injury and equipment damage, disconnect (-)
battery cable from battery.
Never route an energized wire. Make sure battery is disconnected. Always
route electrical wires clear of moving parts, brake lines, sharp edges and
exhaust systems. Avoid making sharp bends in wiring. Attach securely. If
drilling is necessary, fi rst check behind the drilling surface so you do not
damage any fuel lines, vent lines, brake lines or wires.
1. Lower platform to the ground. Then, unfold
platform and fl ipover to the ground (FIG. 4-1).
See Operation Manual for detailed operating
instructions.
2. Disconnect power from liftgate.
Remove nut from negative (-)
battery terminal (FIG. 4-2). Dis-
connect negative (-) battery
cable (FIG. 4-2).
© MAXON Lift Corp. 2018
LIFT CORPORATION Sht. 4 of 18 DSG#
!
!
!
WARNING
WARNING
WARNING
PLATFORM LOWERED TO THE GROUND
NUT
NEGATIVE (-)
BATTERY CABLE
DISCONNECTING POWER
M-16-08
Rev. A Date: 07/02/18
FIG. 4-1
NEGATIVE (-)
BATTERY TERMINAL
FIG. 4-2
