Dc Impedance Measurements - Minipa MX-1050 Manual De Instrucciones

E. DC IMPEDANCE MEASUREMENTS
WARNING
To avoid damages to the meter or to the devices under test, disconnect circuit
power and discharge all the high-voltage capacitors before the impedance
measurement.
1. Press " " to turn on the instrument.
2. Press "FUNC" untill the display exhibit "DCR", selecting the DC impedance me-
asure mode.
3. Insert the resistor in the test input or connect the test lead to perform the mea-
surement.
Note
• In the assistant display will be not exhibited any value.
MX-1050
a
Figure 15
Figure 13
16