Lighting; Auto Power Off; Measure Operation; Selecting The Series/Parallel Mode - Minipa MX-1050 Manual De Instrucciones

I. Lighting
Press the "LIGHT" key for a while to the display be illuminated. After 60 seconds,
the lighting will turn off automatically.
J. Auto Power Off
The instrument will auto turn off after five minutes of disuse.

10) MEASURE OPERATION

A. SELECTING THE SERIES/PARALLEL MODES
The appropriate measure mode can be selected in order to obtain data more pré-
cises during measurements. Generally, it is suggested to select the series match
mode for the low impedance elements (minor than 10kΩ) and parallel for the high
impedance elements (bigger than 10kΩ). The series/parallel equivalence will have
small influence in the measure result.
B. INDUCTANCE MEASUREMENT
MX-1050
Figure 12
a
13