Adjusting The Handlebar; Seat Belt; Use With Infants Under 6 Months; Adjusting The Footrest - JANE RIDER Instrucciones

Ocultar thumbs Ver también para RIDER:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
I. ADJUSTING THE HANDLEBAR
The handlebar can be set to 7 different positions.
Simultaneously press the buttons on both sides of the hand-
14
lebar.
J. SEAT BELT
Your pushchair has a safety harness to keep your child safe at all times.
Fit the belt onto the child whenever he is using the pushchair.
15a
To open the belts, press the button in the middle of the
harness.
15b-15c
To fasten it, bring the two side straps together and then
insert them into the harness until they click into place.
15d
Adjust the belts so that they fit the child correctly with the
right tension. To adjust the length of the belts, slide the buckles
up or down. Make sure that the belts are not twisted.
K. USE WITH INFANTS UNDER 6 MONTHS
To use the seat with children under 6 months old, adjust the an-
gle of the seat to the most reclined position.
Adjust the harness to the lowest position.
!
Compatible with the SMART portable
ATTENTION: Read the assembly instructions.
The footrest can be adjusted to 5 different positions. Use your
thumb to simultaneously press the two buttons on the lower
part of the hammock.
15
PUTTING THE BRAKE ON: Push the lever downwards.
TAKING THE BRAKE OFF: Pull the lever upwards.
To adjust the brake:
If you need a more precise adjustment follow the indications in
figure.
10
.a
15
.a
carrycot........................
To increase the strength turn the lever clockwise.
To reduce it turn the lever anti-clockwise.
L. ADJUSTING THE FOOTREST
16
M. USING THE PARKING BRAKE
18
!
WARNING: When the brake is on make sure that the push-
chair has braked correctly. It may be necessary to push the
pushchair slightly for the brake to be fully activated.
N. ADJUSTING THE STRENGTH OF THE SUSPENSION
17
17
.a
19
19
.a
EN
29
Tabla de contenido
loading

Tabla de contenido