Meaning Of The Leds - Vaillant sensoNET VR 921 Instrucciones De Instalación

Ocultar thumbs Ver también para sensoNET VR 921:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
4.2 Observing the installation
steps
Observe the installation steps in the
illustrated instructions at the end of this
document.
4.3 Replacing the
electrical connection to the
heat generator, if required
1. Remove the power supply unit and the
eBUS connection cable.
2. Install the connection cable (article
number: 0020284732) for the direction
connection to the heat generator.

4.4 Meaning of the LEDs

LED
Status
Yel-
Flashing
low/green
Yel-
Lights up
low/green
Blue
Flickering
Blue
Lights up
Blue
Flashing
Red
Lights up
4.5 Background information
For further information on the product and
the system (EEBus, system information,
etc.), you can call up the following website:
– www.vaillant.com/homecomfort
0020285487_02 Installation instructions
Meaning
The product starts.
The start process
ends; ready for
coupling
The coupling mode
(WLAN) is active
LAN/WLAN is avail-
able. The product is
ready for operation.
Product software is
updating
Internet connection
was disconnected;
when connecting
via LAN: No Internet
connection available
5 Repair
5.1 Replacing the power supply
unit
If you replace the power supply unit,
only use the original power supply unit
from the manufacturer (article number
0020116923 or 0020259111).
6 Technical data
6.1 Technical data –
Communication unit
Note
* Not applicable for article number
0020260964 and not applicable for
Russia/Ukraine.
** Applies for use with the connec-
tion cable for the direct connection
to the heat generator.
Rated voltage
Requirement for the
power supply **
Radio frequency bands
*
WLAN radio frequency
band
Radio frequency output
at 868.0 – 868.6 MHz
(max. e.r.p.)*
Radio frequency output
at 869.4 – 869.65 MHz
(max. e.r.p.)*
WLAN radio frequency
output (max. e.r.p.)
WLAN channels
Power consumption
(average)
Maximum envirno-
mental temperature
Low-voltage wire (bus
line) – cross-section
Ethernet cable (LAN)
Repair 5
5 to 24 V
ES1 resp. PS1 in
accordance with
IEC 62368-1
868.0 –
868.6 MHz, 869.4
– 869.65 MHz,
2.4 GHz
6.6 dBm
6.9 dBm
17.5 dBm
1 – 13
3.0 W
50 ℃
≥ 0.75 mm²
min. Cat 5
29

Hide quick links:

loading