3
Install the replacement bulb into the sockets by aligning the contact pins of the bulb
with the slots in the sockets. Press the metal ends of the bulb into the sockets and roll
the bulb backwards until the contact pins engage into the sockets. Replace the
diffuser in the top lip. Push the grooved edge of the diffuser down into the bottom edge
until it locks in. Restore power to the fixture.
Hg
Troubleshooting Guide
Minor problems often can be fixed without the help of an electrician. Before doing any work
on the fixture, shut off power supply at the circuit breaker panel to avoid electrical shock.
r P
l b o
m e
Fixture doesn't light.
Fuse blows or circuit breaker
trips when light is turned on.
Care and Maintenance
Periodically clean the fixture and diffuser using a mild, non-abrasive cleaner
and soft cloth. When cleaning the fixture, make sure the power is turned off.
Do not spray cleaner directly onto any part of the fixture or bulbs.
Need Help?
In the event you are missing a part or have questions regarding installation
please visit our website at
call the Customer Care Center 1-800-291-8838,
8:30 a.m.-5 p.m., CST, Monday-Friday.
Good Earth Lighting
The manufacturer warrants this lighting fixture to be free from defects in materials
and workmanship for a period of (5) years from the date of original purchase by the
consumer. The fixture is not warrantied for use in a commercial or retail application.
The warranty is limited to use in a residential environment. This warranty does not
cover bulbs. Any applicable bulb warranties are on the bulb manufacturer's
packaging. We will repair or replace (at our option) the unit in the original color and
style if available, or in a similar color and style if the original item has been
discontinued, without charge. Defective units must be properly packed and returned
to the manufacturer with a letter of explanation and your original purchase receipt
showing date of purchase. Call 1-800-291-8838 to obtain a return authorization
number and an address where to ship your defective product. Note: C.O.D.
shipments will NOT be accepted. The liability of the manufacturer is in any case
limited to replacement of the defective light fixture product. The manufacturer will
not be liable for any other loss, damage, labor costs or injury which is caused by the
product. This limitation upon the liability of the manufacturer includes any loss,
damage, labor costs or injury which is (I) to person or property or otherwise; (II)
incidental or consequential in nature; (III) based upon theories of warranty, contract,
negligence, strict liability, tort, or otherwise; or (IV) directly, or indirectly related to
the sale, use, or repair of the product. This warranty gives you specific rights, and
you may also have other rights which vary from state to state.
Good Earth Lighting, Inc. 5260 Capitol Drive, Wheeling, IL 60090
Français
Avertissements et mises en garde
AVERTISSEMENT
• Coupez la source d'alimentation du panneau central de disjoncteurs ou de
fusibles avant de retirer l'ancien luminaire ou d'installer le nouveau.
ATTENTION
• N'UTILISEZ PAS CE LUMINAIRE SUR UN CIRCUIT AVEC GRADATEUR. Si le circuit est
muni de gradateurs, vous devez les retirer et les remplacer par des interrupteurs
ordinaires. S'il est muni d'un gradateur à trois voies, vous devez le remplacer par un
interrupteur à trois voies ordinaire. Si vous n'êtes pas certain de la marche à suivre
pour l'installation, nous vous recommandons de faire appel à un électricien qualifié.
• Cet appareil est conforme à l'alinéa 15 du règlement de la FCC. Son utilisation est
soumise aux deux conditions suivantes : (1) cet appareil ne doit provoquer aucune
interférence nuisible; et (2) cet appareil doit accepter toute interférence reçue, y
compris les interférences pouvant entraîner un fonctionnement indésirable.
Lamp contains Mercury. Dispose according to local,
state, or Federal laws. See: www.lamprecycle.org
C
u a
e s
Bulb is defective.
Power is off.
Bad connection.
Bad switch.
Discontinue use.
5 YEAR LIMITED WARRANTY
www.goodearthlighting.com/support
®
- 3 -
o S
t u l
n o i
Replace bulb.
Check if power supply is on.
Check cords and/or wiring.
Test or replace switch.
Call customer service.
Warranty
or
Printed in China