6604206.book Seite 35 Mittwoch, 30. November 2016 5:54 17
Operating Instructions Midwest E Pro / E Plus
D
E
F
66 04 206 D3686.201.01.02.02
4. Clamp the bur by turning the center part of the handpiece in
direction (D) until it reaches the stop.
When the two marks (E) are located opposite each other, the bur
is clamped.
When using handpiece burs with a reduced shank: always make
sure that the reduced shank does not come into contact with the
opening for the chuck (F).
5. Pull and turn the bur to check that it is firmly in place.
5 Operation
35