Menu Navigation - Uline Ohaus Adventurer H-5276 Manual Del Usuario

TURNING BALANCE ON/OFF
• To turn the balance ON, press the
• To turn the balance OFF, press and hold the
button.

MENU NAVIGATION

TO ENTER/EXIT THE MENU
All menu navigation is performed by touching
the display. To enter Menu, touch MENU from any
application home screen. The main menu appears,
with buttons for BACK and EXIT. (See Figure 1)
Figure 1
Weighing
>0<
Gross:
Tare:
Item Sample
Settings Name
Continue touching the appropriate list item to navigate
to the menu items. (See Figure 2)
CHANGING MENU SETTINGS
Figure 2
Main Menu
Calibration Balance Setup
Communication GLP and GMP Data
Back
To change a menu setting, navigate to that setting
using the following steps:
1. Enter the Menu: From any application screen, touch
MENU. The main menu list appears on the display.
(See Figure 3)
2. Select the Sub-Menu: Find the item of the main
menu list and touch it. The sub-menu appears.
Figure 3
Balance Setup
Language User Settings
Auto Tare Graduations
Back
PAGE 2 OF 54
button.
Max 4200 g d=0.01 g
0.00
g
0.00 g Capacity Guide 4200 g
0.00 g
0%
Save to
Menu
USB
Weighing Units Data Maintenance
Factory Reset Lockout
Exit
Filter Level Auto Zero Tracking
Date & Time Approved Mode
Exit
OPERATION
3. Select the Menu Item: Continue until the desired
setting is chosen in the menu list. Touch the setting to
change it. The changed setting will be displayed as
highlighted yellow for about one second to confirm
the changed value.
4. Exit the Menu and Return to Current Application:
After the setting is confirmed, touch EXIT to return to
the Application.
NOTE: At any time the BACK and EXIT buttons
can be touched to navigate to the desired
area of the menu or return to the current
Application. Continue until the desired setting
is selected in the menu list.
MENU LIST
Touch MENU to open the menu list.
Calibration:
Touch to view calibration options.
Balance Setup:
Touch to view and change balance settings.
Weighing Units:
Touch to view and change weighing units.
Data Maintenance:
Touch to view data maintenance settings.
Communication:
Touch to view COM device settings and print
settings.
GLP and GMP Data:
Insert user data for traceability.
Factory Reset:
Touch to do a factory reset of menu settings.
Lockout:
Touch to view lockout options.
0521 IH-5276