Guarantee And Support; Troubleshooting - Philips AVENT SCF355/07 Manual De Instrucciones

14aaaEnglish
Descaling
It is recommended to descale the bottle warmer every four weeks to ensure it works
efficiently.
1 Mix 50ml/1.7oz of white vinegar with 100ml/3.4oz of cold
water to descale the bottle warmer. Switch on the bottle
warmer, select the express milk warming setting 1 and let
the appliance operate for 10 minutes. Leave the solution
in the bottle warmer until all scale has dissolved.
Note
• You can also use citric acid based descalers.
• Do not use other types of descalers.
2 Unplug the bottle warmer before you empty it.
3 Empty the bottle warmer and rinse its inside thoroughly.
If you still see traces of scale after rinsing, repeat the
descaling procedure.
Recycling
Do not throw away the product with the normal household waste at the end
of its life, but hand it in at an official collection point for recycling. By doing
this, you help to preserve the environment.
Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative consequences
for the environment and human health.

Guarantee and support

If you need information or support, please visit www.philips.com/support or read the
separate worldwide guarantee leaflet.

Troubleshooting

This chapter summarizes the most common problems you could encounter with
the appliance. If you are unable to resolve the problem with the information below,
contact the Consumer Care Center in your country.
Problem Solution
The milk is too You may have selected an incorrect setting or have left the
hot. bottle in the bottle warmer longer than the time indicated in
the settings table.
Select the setting and check the time required to warm the
milk according to the "Express warming reference table".
After the time indicated in the express warming reference
table has passed, take out the bottle immediately or turn the
knob to "Keep Warm" to keep the milk warm, otherwise the
milk will be overheated.
The milk is still You may have selected an incorrect setting or have used a
cold. silicone bottle.
Select the setting and check the time required to warm the
milk according to the "Express warming reference table".
After the time indicated in the express warming reference
table has passed, take out the bottle immediately or turn the
knob to "Keep Warm" to keep the milk warm, otherwise the
milk will be overheated.
If you are using a silicone bottle, after the time indicated in
the express warming reference table has passed, wait for 30-
60 seconds to ensure the milk is warm.
The bottle warmer The milk should never be defrosted at a high temperature
defrosts milk too because it will lead to loss of nutrients. Due to the gentle
slowly. temperature at which the milk is being defrosted, it might
take longer time than expected to melt the milk.
The bottle warmer The bottom of the bottle warmer may be blocked by the
stops working limescale. The bottle warmer should be descaled at least
during the every four weeks. See section "Descaling".
warming process.
I cannot turn on
the bottle warmer.
Englishaaa15