Mounting The Transmitter - Silvercrest SFS 52 B2 Manual De Instrucciones

SFS 52 B2
_289974_SFSS2B2_LB9.indb 17
To cancel the synchronization between
▯
transmitter and receiver, press and hold the
synchronization button
er for about 5 seconds.
Pull the receiver out of the power socket
▯
and wait for about 10 seconds to clear all
connections between the transmitter and the
receiver.

Mounting the transmitter

Select a suitable position for the transmitter,
♦
close to your front door .
Mark the positions for the required drill holes
♦
with the help of the mounting plate q and
drill the holes for the supplied anchors r
(5 mm (3/16") drill) .
Push the anchors into the drill holes and
♦
screw the mounting plate q onto the wall
using the screws t .
Push the transmitter onto the mounting plate q
♦
until it clicks audibly into place .
6 on the receiv-
US - EN │ 17
■
25.08.17 09:3