Festo CPX-CTEL-4-M12-5POL Manual Del Usuario página 19

Dismantling:
• Remove the screws and lift off the module.
Mounting:
1. Check seal and sealing surfaces and put the module
back on.
2. Tighten the screws by hand in diagonally opposite
sequence (tightening torque 0.9 ... 1.1 Nm).
3.2 Setting the DIL-switches
1
DIL switch group 1
(I/O mode)
2
DIL switch group 2
(I/O length)
Festo CPX-CTEL-Z6 1601b English
1 2
19