Movement R5i Manual Del Usuario página 55

E4
E5
E6
C: Misplaced speed sensor.
D: Defective speed sensor.
A: Incline motor induction wire is
not well connected.
B: Incline motor AC wire installed
incorrectly.
C: Incline motor connection wire
loose or defective.
D: Do not know how to use the
incline function.
A: Overload and some part is blocked
due to excess current detected in
the self-check.
B: Defective motor and controller.
C: Power and voltage are not in
compliance or are too low.
A: Voltage less than the correct
voltage 50%.
B: Defective controller.
Install the speed sensor correctly.
Change the speed sensor.
Connect the induction wire correctly.
The AC wire corresponds to the symbol on the
controller.
Change connecting wire or tilt motor.
Press the Learning key on the bottom controller
to review this item.
Adjust the treadmill and restart
Change the engine and controller.
Change the engine and controller.
Perform a new test with the correct voltage.
Change controller.