Movement R5i Manual Del Usuario página 54

ERROR MASSAGE AND SOLUTION
Problem
A: It is not connected to the power
supply.
The treadmill does
B: The security key is not inserted
not work correctly.
C: Transformer was not installed
correctly or is defective.
D: Electrical circuit interrupted.
A: The security key has fallen.
The Treadmill stops
suddenly
B: Electronic system problem.
A: Key is defective.
Key defect
B: Key does not work.
A: Connection wire loose or defective. Connect sensor wire correctly or change the wire.
E1
A: Defective motor or motor
connection wire.
E3
B: Defective controller.
Cause
24
How to solve the problem
Connect to the power supply or put the button in
the on / on position.
Insert the security key in the correct position.
Install the transformer correctly or replace it.
Check the connecting wire and the connecting
wire terminal, and connect correctly.
Insert the security key correctly.
Request technical assistance.
Change key.
Change keyboard and wiring. Change PCB board.
Change computer.
Change the motor wire or change the motor
Change controller.