Movement R5i Manual Del Usuario página 50

6 - Meter-inch conversion function:
6.1 Remove the security key and press the "PROGRAM" and "MODE" keys at the same time. The "SPEED"
window displays a "0.6", which means converting from kilometers to miles.
6.2 Remove the security key and press the "PROGRAM" and "MODE" keys at the same time. The "SPEED"
window displays a "1.0", which means converting miles to kilometers.
7 - USER program:
The treadmill has three user modes: USER01, USER02, and USER03, which can be adjusted by the user.
Press the "PROG" key to AMA select the program U01 ~ U03. Press the "MODE" key to set the parameters.
The user can define their own 10 speed and incline segments.
After defining the parameters, press "START" to set the belt in motion. The user's exclusive program will be
saved automatically and can be used in the future.
8 - Fan function (optional):
a) When the fan is stopped, it will start running as soon as you press the fan button.
b) When the fan is open, it will stop working as soon as you press the fan button.
9 - ERP interconversion function:
If the treadmill displays ERP mode, it will go into sleep mode after four and a half minutes. This function can be
enabled or disabled. Press the "MODE" button for 3 seconds.
When the display shows 'TIME' numbers 2222, ERP mode is canceled. Press the "MODE" button for 3
seconds again.
When the 'TIME' display shows the numbers 1111, the device has returned to ERP mode.
10 - HRC (Optional)
1. Definition: HRC is a speed mode that sets the heart rate and adjusts the speed automatically through wired
or wireless pulse detection. It is based on an average pulse rate.
2. The HRC standard consists of three groups: the speed limit for HRC1, HRC2, HRC3 modes is 9 km / h 11 km
/ h and 13 km / h.
3. The HRC can define the variation of methods, orders and parameters. When pressing the "PROGRAM"
button to display the HRC, press "MODE" to confirm and proceed to the next configuration group, you can
change items (A), (B), (C) and (D) by pressing the "SPEED" "+" / "-" It will start when you press the "START"
button.
A: Age group: 15-80 years. The default is 25 years.
B: Heartbeat target: (220-age) * 0.6
C: The target pulse correction range: 80-180
D: The default time is 30 minutes. The correction range: 5-99 minutes.
4. Speed variation
A: Frequency of variation. The HRC checks the pulse every 30 seconds (the pulse is displayed).
B: When the user's pulse is 30 beats per minute below the pulse target, the speed increases by 2.0km/h.
C: When the user's pulse is 6-29 beats per minute below the pulse target, the speed increases by 1.0km/ h.
D: When the user's pulse is 30 beats per minute above the pulse target, the speed is reduced by 2.0 km / h.
E: When the user's pulse is 6-29 beats per minute above the pulse target, the speed is reduced by 1.0 km / h.
F: When the user's pulse is 0-5 beats per minute above or below the pulse target, the speed does not change.
5. Depending on the situation, the treadmill speed will drop to the minimum in 1 minute, and will stop running
after 15 seconds at minimum speed, with audible beeps every second.
A: It is not possible to check the beats per minute.
B: Depending on the pulse, the speed will be reduced to the minimum speed
C: The pulse rate is above the recommended for (220 age).
6. It is not possible to reduce the speed below the minimum when it is above the minimum speed. For example,
if the minimum speed is 1.0 km / h, it will be reduced to 1.0 km / h when you go from 1.6 km / h to 1.0 km / h.
7. The slope is not controlled by the pulse. It can be adjusted manually.
8. The initial speed is 1.0 km / h. The speed will not be adjusted according to the pulse before completing the
first minute or 1.5 minutes.