Adjusting The "Utc" Time Zone - Hamilton KHaki Flight Timer Manual De Instrucciones

4. Pilot functions
Deleting a block log
1. In position (p1) turn the crown to access the display
"Lo Run".
2. A short press of button
number of the block to be deleted.
3. Pull the crown out to position (p2). The display
indicates "CLEAr" and the block number.
4. A long press on button
and deletes the chosen block.
NB: If the total "to" is chosen, a long press on
button definitively deletes all the memorized logs.
A
16
allows choice of the
A
causes the display to flash
A
5. Push the crown back to position (p1) to return to
the basic display. The block numbers remaining are
shifted. In case of total deletion, the display is returned
entirely to zero.
Adjusting the time zone "UTC"
4.4
1. In position (p1) turn the crown to access the display
"UTC" (Universal Coordinated Time).
2. Pull the crown out to position (p2). The hours and
minutes display flashes.
3. Turn the crown to adjust the values.
4. Press button to switch between hours and minutes.
B
5. Push the crown back to position (p1) to confirm the
settings.
© HAMILTON 19/07/2013