3. Instructions for use
3.13 Chronograph "CHR"
It is possible to time a duration of maximum 99 hours
59 minutes 59 seconds and 99 hundredths of a second.
Note: After 24 hours, the display indicates only the days,
hours and minutes.
Measuring a unique or additional time
1. In position (p1) turn the crown to access the display
"CHR' 00".
2. A short press of button
beep sounds.
3. A short press of button
display indicates the result with an "Add'" followed by
the hundredths of a second and the hours, minutes
and seconds underneath. A further press on the but-
ton relaunches the timing and adds the time onto the
first timing.
4. A short press of button
INSTRUCTION MANUAL
starts the chrono and a
A
stops the chrono and the
A
resets the chrono to zero.
B
Timing split times
1. A short press of button
beep sounds.
2. A short press of button
"SPL".
3. A further press on button
continue and the elapsed time is caught up with. A
third press displays the second split time. The same
procedure should be followed for further split times.
4. A short press of button
displays the added times (total time).
5. A short press of button
starts the chrono and a
A
displays the first split time
B
causes the timing to
B
stops the chrono and
A
resets the chrono to zero.
B
11