Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CONNECTIONS
1.- Locate the BNC input jacks on the rear of the video recorder.
2.- Connect the #1 camera in the BNC input jack labeled as CH1.
Use this same process for up to four cameras if you wish.
3.- Connect a monitor to one of the BNC output jacks labeled as
VID��O OUTPUT
CAMERA 2
CAMERA 1
MONITOR
4.- Plug an AC power adapter into the DC power connector, then
Plug an AC power adapter into the DC power connector, then
connect it into an AC outlet.
SYSTEM BOOT
After you turn the equipment on, the system will boot up and
automatically detects the new HD. In the monitor you will see informa-
tion about HDD
Checking HDD.............
al lea este instructivo para evitar cualquier mal funcio-
It is recommended to format the hard drive first, remember to
namiento. Guárdelo para futuras referencias.
format the hard disk will be lost all the information (if you have
information) on your hard disk.
For more details refer to the section of the menu "Format the
Este Kit es ideal para estudiantes o aficionados a la me-
hard disk"
At the beginning, the monitor will display 4 cameras with next
information:
Date and hour.
RECORDING
In order to begin recording, follow these steps:
1.- Power the device on and setup whatever is necessary (��nable
cameras of recording, quality video, speed, date and time, etc.) For
more information you can consult the main menu.
2.- To begin to record press rec button.
3.- To stop the recording press the stop button.
PLAYBACK
After finishing a record, you can playback it.
Press Play and you will watch the last record.
If you want to see a list of previous recordings, press Menu while
playing a file, then use Up / Down buttons to select a file, finally, press
Play to playback the selected file.
SOFTWARE
1.- Insert the CD of installation.
2.- Open and run the "Setup 3.3" file.
3.- Press Next to continue with the installation.
4.- Accept the license so press the next button.
5.- ADD the name and the organization.
If you wish that Anyone use this program, press "Anyone who..." or
select "Only for me"
To continue press the next button.
6.- Select the folder where you save the files, after press the next
button.
7.- Press the "Install" button.
8.- To end press the "Finish" button.
9.- Open "Dvr Viewer"
Screen`s controls
1.- Take a picture in that moment.
Press this button and select a Jpg or Bmp format.
��NGLISH-03
CAMERA 3
CAMERA 4
TO AC/DC ADAPTER
CAMERA 3
The picture will be to
saved in folder from
1
installation.
2.- Recording.
2
The record is
3
saved in the computer
in MYS or Avi format
4
the file is saved
5
in folder from
installation.
6
If you select the
7
Avi format, you have
to select the
8
compression, if you
don´t known the type,
select "complete frames"
3.- Here, the caputure
directory will show.
4.- Print
You can print a picture
from the screen
5.- ��vent list.
Select a event to
playback and press the
ok button.
6.- DVR or PC Mode:
In DVR mode; Play the
Hdd`s content from
the DVR
In PC mode: Open the MYS file from PC
7.- Camera 1, 2, 3 or 4 controls, also in quad mode
8.- Quick return
9.- Return to step
10.- Normal return.
11.- Pause.
12.- Play.
13.- Progress to step
14.- Quick progress.
15.- Volume control
16.- Bar playback.
17.- To Close
18.- To minimize
SPECIFICATIONS
Power Input: 12V - - - 3A
Remote control:
Power Input: 3V - - - (2 x AAA)
Converter
Power Input: 100-240V~ 50/60 Hz 1A
Output: 12V - - - 3A
al lea este instructivo para evitar cualquier mal funciona-
Product details and specifications are subject to change without
miento. Guárdelo para futuras referencias.
previous notice.
��NGLISH-04
18
9 10 11 12 13 14 15
17
16
Tabla de contenido
