Sears Kenmore 796.4128 31 Serie Manual De Uso página 27

MAIN'rENANCE (continued)
C leaning the Drain Pump Filter
Your Washer is equipped with a filter that helps prevent
excess lint and foreign objects like buttons, keys, and
coins from causing damage to the pump. if the washer
fails to drain properly, unplug the washer and allow the
water
to coot,
if necessary,
before
proceeding.
Open the drain pump filter access panel.
J
O Remove the plug from the drain hose, and allow the
water to drain completely.
NOTE: If there is a large amount of water in the drum,
you may have to empty your container several times.
J
Unclip the drain hose and puii it out. Place the end of
the drain hose into a shallow pan or a floor drain. Make
sure not to pull the hose out too far, or it may not drain
properly.
O Twist the pump filter counterclockwise to remove.
Remove any lint and foreign objects from the pump fiJten
Insert pump filter back into opening and twist clockwise
to secure. Be sure to close the drain pump filter access
panel.
27