Matrix R30 Manual Del Usuario página 6

CONSOLE
U30
U50
PULSE GRIP HANDLEBARS
RESISTANCE TOGGLES
SEAT
SEAT ADJUSTMENT LEVER/KNOB
SHROUD
POWER CORD SOCKET
10
MX16_AG_Bikes_ENG_FRE_SPE_r1_1.indd 10-11
WATER BOTTLE HOLDER
U50 SHOWN
A Open HARDWARE FOR STEP 1.
1
B Attach the SEAT (1) to the SEAT POST (2)
using SEAT BRACKET (3) and 2 BOLTS
(A). Torque settings: 9.5 Nm / 7 lb-ft.
U30
Note: Tighten the bolts evenly by alternating between
U50
front and back until completely tightened.
Hardware For Step 1
Description Qty
CONSOLE MASTS
A Bolt 2
TOP CAP
3
CRANK
PEDALS
A Open HARDWARE FOR STEP 2.
2
B Carefully pull the CABLE (4) through the RIGHT CONSOLE
MAST (6) using the LEAD WIRE (5) located inside the
CONSOLE MAST (6). Discard the lead wire.
U30 Attach the RIGHT CONSOLE MAST (6) to
C
BIKE FRAME (8) using 5 BOLTS (B).
U50
D Attach the LEFT CONSOLE MAST (7) to BIKE FRAME (8)
using 5 BOLTS (B). Leave bolts loose until after step 3.
Note: Be careful not to pinch any wires while attaching the console mast.
Hardware For Step 2
Description
B Bolt
1
2
A
U50 SHOWN
5
Qty
10
4
7 6
B
4
8
11
3/10/16 2:04 PM