Milwaukee M18 Guia De Inicio Rapido

IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL INSTRUCTIONS. When using electric appliances, basic
WARNING
precuautions should always be followed, including the following:
Before using the flood light, read this operator's manual, your battery pack and charger operator's manual, and
all labels on the battery pack, charger and flood light.
• Read and understand all the instructions before using the appliance.
• To reduce the risk of injury, close supervision is necessary when an appliance is used near children.
• Store idle flood light out of reach of children. Warm flood lights can become hazardous in the hands of
children.
• Do not use outdoors.
• For a rechargeable appliance - Use only the charger supplied by the manufacturer to recharge.
• Know your flood light. Read this manual carefully to learn your flood light's applications and limitations as
well as potential hazards associated with this type of tool.
• Batteries must be recharged only with the charger specified by the manufacturer. A charger that may be
suitable for one type of battery may create a risk of fire when used with another battery.
• Use flood light only with specifically designated battery pack. Use of any other batteries may create a risk
of fire.
• When battery pack is not in use, keep it away from metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make a connection from one terminal to another. Shorting
the battery terminals together may cause sparks, burns, or a fire.
• Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a
MILWAUKEE service facility for a free replacement.
SAVE THESE INSTRUCTIONS
Volts
Direct Current
Underwriters Laboratories, Inc. United States and Canada
C US
Recharge only with the charger specified for the battery. For specific charging instructions,
WARNING
read the operator's manual supplied with your charger and battery.
Inserting/Removing Battery Pack
Insert the battery pack by sliding battery pack into the body of the tool. Insert the battery pack until the battery
latches lock.
To remove the battery pack, press in both battery latches and slide the battery pack off of the tool.
To reduce the risk of injury, do not look directly into the light when the flood light is on.
WARNING
To turn on the flood light, press the ON/OFF button
ton for the low setting. Press the button for the high setting. To turn off the flood light, press the ON/OFF
button again .
If the flood light does not turn on with a fully charged battery pack, remove the battery pack for one minute and
then reinsert to reset the floodlight.
There are many ways to orient the flood light to best suit your job.
• Hang or hold the flood light from the top handle.
• Set the flood light on one of eight sides.
• Mount on a user-built stand using a 3/4" bar.
• String up on a wire run through the pass-through holes.
To reduce the risk of injury, always unplug the charger and remove the battery pack from
WARNING
the charger or tool before performing any maintenance. Never disassemble the tool, battery
pack or charger. Contact a MILWAUKEE service facility for ALL repairs.
Maintain Flood Light
Keep your flood light, battery pack and charger in good repair by adopting a regular maintenance program. If the
flood light does not work properly, return the flood light to a MILWAUKEE service facility for repairs.
To reduce the risk of injury and damage, never immerse your tool, battery pack or charger
WARNING
in liquid or allow a liquid to flow inside them.
Keep tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean the tool, bat-
tery pack and charger since certain cleaning agents and solvents are harmful to plastics and other insulated parts.
Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia
and household detergents containing ammonia. Never use flammable or combustible solvents around tools.
Always remove battery pack before changing or removing accessories. Only use acces-
WARNING
sories specifically recommended for this tool. Others may be hazardous.
For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go online to
www.milwaukeetool.com. To obtain a catalog, contact your local distributor or a service center.
LIMITED WARRANTY - USA AND CANADA
Every MILWAUKEE power tool* (see exceptions below) is warranted to the original purchaser only to be free from defects
in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on an electric
power tool which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a
period of five (5) years** after the date of purchase unless otherwise noted. Return of the power tool to a MILWAUKEE
factory Service Center location or MILWAUKEE Authorized Service Station, freight prepaid and insured, is required. A
copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that
MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized person-
nel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
Normal Wear: Many power tools need periodic parts replacement and service to achieve best performance. This
warranty does not cover repair when normal use has exhausted the life of a part including, but not limited to, chucks,
brushes, cords, saw shoes, blade clamps, o-rings, seals, bumpers, driver blades, pistons, strikers, lifters, and bumper
cover washers.
*This warranty does not cover Air Nailers & Staplers; Airless Paint Sprayer; Cordless Battery Packs; Gasoline Driven
Portable Power Generators; Hand Tools; Hoist – Electric, Lever & Hand Chain; M12™ Heated Gear; Reconditioned
Product; and Test & Measurement Products. There are separate and distinct warranties available for these products.
**The warranty period for Job Site Radios, M12™ Power Port, M18™ Power Source, Jobsite Fan and Trade Titan™
Industrial Work Carts is one (1) year from the date of purchase. The warranty period for the Drain Cleaning Cables is
two (2) years from the date of purchase. The warranty period for the M18™ Compact Heat Gun and the 8 Gallon Dust
Extractor is three (3) years from the date of purchase. The warranty period for the LED in the LED Work Light and the
LED Upgrade Bulb for the Work Light is the lifetime of the product subject to the limitations above. If during normal use
the LED or LED Bulb fails, the part will be replaced free of charge.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE power tool product. The
manufacturing date of the product will be used to determine the warranty period if no proof of purchase is provided at
the time warranty service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDI-
TION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE
TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE
LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS,
ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE
TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS
OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSE-
QUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY
IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT
PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO
THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO
THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE.
This warranty applies to product sold in the U.S.A. and Canada only.
Please consult the 'Service Center Search' in the Parts & Service section of MILWAUKEE's website www.milwaukeetool.
com or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest service facility for warranty and non-warranty
service on a Milwaukee electric power tool.
LIMITED WARRANTY - USA AND CANADA
Every MILWAUKEE power tool* (see exceptions below) is warranted to the original purchaser only to be free from defects
in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on an electric
power tool which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a
period of five (5) years** after the date of purchase unless otherwise noted. Return of the power tool to a MILWAUKEE
factory Service Center location or MILWAUKEE Authorized Service Station, freight prepaid and insured, is required. A
copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that
MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized person-
nel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
SYMBOLOGY
ASSEMBLY
OPERATION
Operation
. The light will default to high mode. Press the
Hang/Mount
MAINTENANCE
Cleaning
ACCESSORIES
Cat. No. / No de cat.
2361-20
Normal Wear: Many power tools need periodic parts replacement and service to achieve best performance. This
warranty does not cover repair when normal use has exhausted the life of a part including, but not limited to, chucks,
brushes, cords, saw shoes, blade clamps, o-rings, seals, bumpers, driver blades, pistons, strikers, lifters, and bumper
cover washers.
*This warranty does not cover Air Nailers & Staplers; Airless Paint Sprayer; Cordless Battery Packs; Gasoline Driven
Portable Power Generators; Hand Tools; Hoist – Electric, Lever & Hand Chain; M12™ Heated Gear; Reconditioned
Product; and Test & Measurement Products. There are separate and distinct warranties available for these products.
**The warranty period for Job Site Radios, M12™ Power Port, M18™ Power Source, Jobsite Fan and Trade Titan™
Industrial Work Carts is one (1) year from the date of purchase. The warranty period for the Drain Cleaning Cables is
two (2) years from the date of purchase. The warranty period for the M18™ Compact Heat Gun and the 8 Gallon Dust
Extractor is three (3) years from the date of purchase. The warranty period for the LED in the LED Work Light and the
LED Upgrade Bulb for the Work Light is the lifetime of the product subject to the limitations above. If during normal use
the LED or LED Bulb fails, the part will be replaced free of charge.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE power tool product. The
manufacturing date of the product will be used to determine the warranty period if no proof of purchase is provided at
the time warranty service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDI-
TION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE
TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE
LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS,
ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE
TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS
OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSE-
QUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY
IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT
PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO
THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO
THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE.
This warranty applies to product sold in the U.S.A. and Canada only.
Please consult the 'Service Center Search' in the Parts & Service section of MILWAUKEE's website www.milwaukeetool.
com or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest service facility for warranty and non-warranty
service on a Milwaukee electric power tool.
LIMITED WARRANTY - MEXICO, CENTRAL AMERICA AND CARIBBEAN
TECHTRONIC INDUSTRIES' warranty is for 5 years since the original purchase date.
This warranty card covers any defect in material and workmanship on this Product.
To make this warranty valid, present this warranty card, sealed/stamped by the distributor or store where you purchased
the product, to the Authorized Service Center (ASC). Or, if this card has not been sealed/stamped, present the original
proof of purchase to the ASC.
Call toll-free1 01 (800) 030-7777 to find the nearest ASC, for service, parts, accessories or components.
Procedure to make this warranty valid
Take the product to the ASC, along with the warranty card sealed/stamped by the distributor or store where you pur-
chased the product, and any faulty piece or component will be replaced without cost for you. We will cover all freight
costs relative with this warranty process.
Exceptions
This warranty is not valid in the following situations
a) When the product is used in a different manner from the end-user guide or instruction manual.
b) When the conditions of use are not normal.
but-
c) When the product was modified or repaired by people not authorized by TECHTRONIC INDUSTRIES.
Note: If cord set is damaged, it should be replaced by an Authorized Service Center to avoid electric risks.
SERVICE AND ATTENTION CENTER
Call to 01 (800) 030-7777
IMPORTED AND COMMERCIALIZED BY
TECHTRONIC INDUSTRIES MEXICO, SA DE CV
Av President Masarik #29 piso 7, Col. Polanco V Sección
CP 11560, Deleg. Miguel Hidalgo, CDMX
Model:
Date of Purchase:
Distributor or Store Stamp:
RÈGLES DE SECURITÉ GÉNÉRALES
AVERTISSEMENT
Avant d'utiliser l'éclairage par projection, lire le présent manuel d'utilisation et celui du bloc-piles et du chargeur,
ainsi que toutes les étiquettes se trouvant sur le bloc-piles, le chargeur et l'éclairage par projection.
• Lire et bien comprendre toutes les instructions avant d'utiliser l'appareil.
• Pour réduire les risques de blessures, porter une attention particulière lorsque le produit est utilisé en
présence d'enfants.
• Entreposer l'éclairage par projection non utilisé hors de la portée des enfants. Les éclairages par projec-
tion chauds peuvent être dangereux dans les mains des enfants.
• Ne pas utiliser cet outil à l'extérieur.
• S'il s'agit d'un outil rechargeable, utiliser exclusivement le chargeur fourni par le fabricant afin de le recharger.
• Savoir votre éclairage par projection. Lire attentivement ce manuel pour apprendre les applications et les
limites de votre éclairage par projection, ainsi que les risques spécifiques relatifs à son utilisation.
• D oit être rechargée seulement avec le chargeur spécifié pour la pile. Un chargeur adapté à un certain type
de pile peut créer un risque d'incendie s'il est utilisé avec d'autres piles.
• N'utiliser l'éclairage par projection qu'avec le bloc-piles recommandé. L'usage de toutes autres piles peut
créer un risque d'incendie.
• L orsque le bloc‑batterie n'est pas en service, tenez‑le à l'écart d'autres objets métalliques (trombones,
pièces de monnaie, clés, clous, vis, etc.) susceptibles d'établir un contact électrique entre les deux
bornes. La mise en court-circuit des bornes de la batterie peut produire des étincelles et constitue un risque
de brûlures ou d'incendie.
• E ntretenez les étiquettes et marques du fabricant. Les indications qu'elles contiennent sont précieuses. Si
elles deviennent illisibles ou se détachent, faites-les remplacer gratuitement à un centre de service MILWAUKEE
accrédité.
Volts
T
ension CD seul.
Underwriters Laboratories, Inc., États-Unis et Canada
C US
AVERTISSEMENT
teries.
Insérez le bloc de piles à partir de l'avant en le faisant glisser dans le corps de l'outil. Insérez le bloc de piles
jusqu'à ce que son loquet se verrouille.
Pour retirer le bloc de piles, enfoncez les deux loquets de la pile et faites glisser le bloc hors de l'outil.
AVERTISSEMENT
Pour allumer l'éclairage par projection, appuyer sur le bouton
mode élevé par défaut. Appuyer sur le bouton
élevé. Pour l'éteindre, appuyer de nouveau sur le bouton
Si l'éclairage par projection ne s'allume pas en utilisant un bloc-pile complètement chargé, retirer le bloc-pile et
attendre 1 minute avant de le réinsérer pour réinitialiser l'éclairage par projection.
Vous pouvez orienter votre éclairage par projection de plusieurs façons pour satisfaire le mieux à votre travail.
• Suspendre ou soutenir l'éclairage par projection de la poignée supérieure.
• Mettre l'éclairage par projection sur l'un de ses huit côtés.
• Monter sur un support installé par l'utilisateur à l'aide de la barre de 19 mm (3/4")
• Enchaîner sur un fil traversant les passe-fils.
M18™ FLOOD LIGHT
ÉCLAIRAGE PAR PROJECTION M18™
LÁMPARA DE TRABAJO M18™
VOUS DEVEZ LIRE ET COMPRENDRE TOUTES LES INSTRUCTIONS. Lors de
l'utilisation d'outils électriques, toujours suivre les consignes de base, notamment:
CONSERVEZ CES INSTRUCTIONS
PICTOGRAPHIE
MONTAGE DE L'OUTIL
Ne recharger la batterie qu'avec le chargeur spécifié. Pour les instructions de
charge spécifiques, lire le manuel d'utilisation fourni avec le chargeur et les bat-
Insertion du bloc de piles dans l'outil
MANIEMENT
Pour réduire les risques de blessures, ne pas regarder directement dans la source
lumineuse lorsque l'éclairage est allumé.
Utilisation
« On/Off » (Marche/Arrêt). La lumière est en
pour le réglage bas. Appuyer sur le bouton
« On/Off » (Marche/Arrêt).
Suspendre / Monter
pour le réglage