Tabla de contenido
Pusher............................................................................................................................................1 pc.
Coarse grater ...............................................................................................................................1 pc.
Fine grater....................................................................................................................................1 pc.
Coarse shredder ..........................................................................................................................1 pc.
Fine shredder ..............................................................................................................................1 pc.
User manual ................................................................................................................................1 pc.
Service booklet ...........................................................................................................................1 pc.
Manufacturer reserves the right to make any modifications to design, packaging, or
technical specifications of the product without prior notice.
Meat grinder parts
A1
1. Motor unit
2. ON/OFF button
3. Drive shaft clutch
4. Screw
5. Vegetable cutter unit
6. Dismountable pusher with attachment storage capacity
7. Locking knob
8. Fine shredder
9. Coarse shredder
10. Fine grater
11. Coarse grater
12. Power cord
I. BEFORE USE
Carefully remove the appliance and its parts from the box. Remove the package and
stickers.
Be sure to keep in place precautionary stickers, stickers pointers (if applicable) and the
table with serial number on its housing!
After transportation or storage at low temperature allow the appliance to stayat room
temperature for at least 2 hours before use.
Wipe the motor unit with a damp cloth. Rinse all removable parts, strictly following the
guidelines of the section "Cleaning and maintenance". All removable parts should
completely dry at room temperature before the appliance assembly.
Before operating the appliance ensure that outer and visible inner parts of the appliance
are not damaged, do not have chips and other defects.
II. OPERATION
1. Prepare products. If necessary, cut them so that they freely pass through the feed
hole.
2. Insert the required nozzle into the unit of the vegetable cutter. Perforations on
the auger should align with the slots on the nozzle.
3. Put the lock ring on the the vegetable cutter unit and rotate it counter-clockwise.
The lock ring marker should align with the
4. Rotate the assembled unit 45° clockwise and insert its axle into the drive
shaft coupling on the motor unit. Rotate the unit counter-clockwise until it
clicks.
5. Put the container for chopped products under the lock ring of the unit.
DO NOT put nuts, coffee beans, ice cubes, sugar and other very firm or coarsely cut
products into the vegetable cutter. It shortens the service life of the appliance and may
lead to its breakage.
DO NOT use the appliance for chopping meat and fish.
6. Plug in the appliance. Press the switch on/off button.
7. Push food pieces into the tray feed hole using the pusher. Do not try to push
products into the vegetable cutter by fingers or foreign items.
CAUTION! The continuous operation time of the appliance should not exceed 2 minutes.
The idle time should be no less than 5 minutes.
8. To switch off the appliance, repress switch on/off button and disconnect it from
the power outlet.
Overload protection system
The appliance is equipped with the protective system that switches off the appliance
upon overload. If it has occurred, press the switch on/off button, disconnect the appliance
from the power outlet and let it completely cool down. Clean the feed hole from the
remaining products and connect the appliance to the power outlet. The appliance will
be ready for operation.
The recommended order of operating the appliance and its nozzles is shown in the
table.
RKA-FP4-E
GBR
icon on the vegetable cutter unit.
7
Capítulos
Tabla de contenido
