Westfalia SIARR 18 Instrucciones De Montaje página 2

SIARR
18 - 37
PREPARATION
* Remove the trim from the bottom of the boot.
* Remove the bumper and make a cut at its center as per sketch 1.
* Take off the absorber, remove its right and left
hand sections, then make a cut as per sketch 2.
* Drop the exhaust.
ASSEMBLY
* Fit the absorber onto the tow bar, then position
this in the longitudinals and fasten it at points V
and W using the fastening kit.
* Fit the electrical socket support onto
the tow bar using fastening kit X.
* Tighten all of the nuts, bolts and screws
to the torques indicated below.
FINISHING
* Reassemble all of the components
removed during the above procedure.
FASTENING KIT
V
Existing fastenings
T
1 off spacer L.24 dia.12/17
Y
Existing fastenings
U
1 soacer L.32 dia.12/17
Z
2 off HM6x15 screws
X
2 off CS6 washers
2 off HM6 nuts
Only on the vehicle
W
from 11/2004
S
Existing fastenings
1 off spacer lg.24 dia.12/17
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
T
Existing fastenings
2 off 10/40 plain washers
4 off HM12x25 screws
4 off CS12 washers
2 off HM16x45 screws
2 off CS16 washers
2 off HM16 nuts
2 off HM10x100 screws
2 off HM10 nuts
2 off CS10 washers
2 off 10/27 plain washers
2 off 10/40 plain washers
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
FILE : BUREAU\NOTICEDEMONTAGE\SIARR\NDMWESTFALIA\NDM1837-E - FOLIO NDMANG
W
V
Z
Z
Y
NB :
Connecting a universal wiring kit ref.8526 is absolutely impossible on the vehicle (may
cause damage).
It is essential to use either a dedicated wiring kit or a relay box ref.8530.
Type Type
Approval No.
Tow bar for
Audi A4 e11*94/20*00*3809
post 02/2001
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
305336600001
1 - Bumper cut out
50
70
140
W
!
V
2 - Absorber cut out
45
80
U / S
Max. Total Max. Total
Authori. Weight Towable Weight
2 000 kg 1 700 kg
axis
Affix the sticker in
the position indicated
axis
160
Max. Verti- Value
cal load D
75 kg 9,02 kN