Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Style C Electric Battery Configuration
CONNECT THE POSITIVE
(RED) CLAMP OR O-RING
TO HERE
6. When the charger is properly connected, the unit detects the battery voltage of the connected battery. The charging process will start
after a few seconds. The Charging LED will light yellow to indicate the unit is in Charging Mode.
Notes:
If the Battery Clamps or Terminal Rings are incorrectly connected with regard to polarity, the Fault LED flashes red. Unplug the charger; then remove
the clamps or Terminal Rings. Reconnect them properly.
If the unit detects the Battery Clamps are connected to the 36V or 48V batteries, the Fault LED flashes red and the charging process automatically
terminates. Unplug the charger; then remove the clamps. Use the Terminal Rings for 36 volt and 48 volt applications.
If the charger is overheated, the Fault LED will flash red and the charging process automatically terminates. Unplug the charger and allow the unit
to cool down for several minutes. Make sure there is adequate ventilation around the unit before attempting to charge again.
If the Charging LED does not come on, check the connection to the battery. If the Battery Clamps or Terminal Rings are properly connected, the
battery may be in fault condition. Manufacturer suggests to have the battery tested by a qualified battery service technician.
If the unit detects that the voltage of the connected battery is different from the battery voltage that the user selected, the charging process will
still begin, but the Fault LED will flash red and the Charging LED will light yellow simultaneously to indicate the unit is in Charging Mode, but the
selection on the battery voltage is incorrect. This will not affect the charging performance. It is just an indication to remind the user that the battery
voltage selection is incorrect. The red Fault LED will stop flshing once the Battery Voltage Selector Knob is rotated to the correct battery voltage.
7. When the battery is fully charged, the Ready LED lights green, and the battery charger automatically goes into Float Charge Mode.
In this mode, the charger monitors the battery voltage and charges as necessary to assure the battery maintains a full charge. The
charger remains in Float Charge Mode as long as the charger is connected to the battery and is plugged into a functioning AC outlet.
Note:
If the unit detects that the voltage of the connected battery is different from the Battery Voltage LED that the user selected, Float Charge Mode
will still proceed, but the red Fault LED will flash and the green Ready LED will light simultaneously to indicate the unit is in Float Charge Mode, but
the selected battery voltage is incorrect. This will not affect Float Charging performance. It is just an indication to remind the user that the battery
voltage selection is incorrect. The red Fault LED will stop flshing once the Battery Voltage Selector Knob is rotated to the correct battery voltage.
When disconnecting the charger, disconnect the AC cord, then remove the Battery Clamps or the Terminal Rings from the battery posts.
Charging Golf Carts with the Round Cart Connector or Rectangular Cart Connector
WARNING – To reduce the risk of injury or property damage:
• Make sure the golf cart power is turned OFF before attempting charging procedures. Refer to the golf cart user manual.
• Make sure the Round Cart Connector or Rectangular Cart Connector is fully engaged (securely connected) before attempting to charge.
IMPORTANT: Terminal ring connectors are universal to all golf carts. Some carts that use round or rectangular simple connectors have an
on-board computer that can inhibit charging. Manufacturer recommends using the Terminal Rings in this instance. Refer to the vehicle
owner's manual.
1. Insert the connector end of the appropriate Cart Connector Cable (Round or Rectangular) into the unit's Charger Connector, then
plug the unit's 120 volt power plug into a functioning standard North American 120 volt 60Hz outlet. One of the six Battery Voltage
Indicators will light blue to indicate the unit is plugged in and ready to use.
Note:
If none of the Battery Voltage Indicators light up, check the connection to the AC outlet. Make sure the AC outlet is working.
2. Plug the other end of either the Cart Connector into the golf cart's charging port. Make sure there is good contact.
3. When the charger is properly connected, the unit detects the battery voltage of the connected battery. The charging process will start
after a few seconds. The Charging LED will light yellow to indicate the unit is in Charging Mode.
Notes:
If the charger is overheated, the Fault LED will flash red and the charging process automatically terminates. Unplug the charger and allow the unit
to cool down for several minutes. Make sure there is adequate ventilation around the unit before attempting to charge again.
GBCPro2_ManualENSP_120816.indd 10-11
CONNECT THE NEGATIVE
TOW/RUN
(BLACK) CLAMP OR O-RING
SWITCH
TO HERE
10
10
If the Charging LED does not come on, check the connection to the battery. If the appropriate Cart Connector is properly connected, the battery
may be in fault condition. Manufacturer suggests to have the battery tested by a qualified battery service technician.
If the unit detects that the voltage of the connected battery is different from the battery voltage that the user selected, the charging process will
still begin, but the Fault LED will flash red and the Charging LED will light yellow simultaneously to indicate the unit is in Charging Mode, but the
selection on the battery voltage is incorrect. This will not affect the charging performance. It is just an indication to remind the user that the battery
voltage selection is incorrect. The red Fault LED will stop flshing once the Battery Voltage Selector Knob is rotated to the correct battery voltage.
4. When the battery is fully charged, the Ready LED lights green, and the battery charger automatically goes into Float Charge Mode.
In this mode, the charger monitors the battery voltage and charges as necessary to assure the battery maintains a full charge. The
charger remains in Float Charge Mode as long as the charger is connected to the battery and is plugged into a functioning AC outlet.
Note:
If the unit detects that the voltage of the connected battery is different from the Battery Voltage LED that the user selected, Float Charge Mode
will still proceed, but the red Fault LED will flash and the green Ready LED will light simultaneously to indicate the unit is in Float Charge Mode, but
the selected battery voltage is incorrect. This will not affect Float Charging performance. It is just an indication to remind the user that the battery
voltage selection is incorrect. The red Fault LED will stop flshing once the Battery Voltage Selector Knob is rotated to the correct battery voltage.
When disconnecting the charger, disconnect the AC cord, then unplug the Round Cart Connector or Rectangular Cart Connector from the
golf cart's charging port.
Using the hanging hook
The hanging hook allows you to position the battery charger for convenient, hands-free operation. The hanging hook rotates 360° as
needed.
CAUTION – To reduce the risk of product damage:
• When charger is hung by the hanging hook, do not shake the charger or object that it is hanging from. Do not hang the light from any
electrical wires or anything that it is not secure.
• Only use the hanging hook for hanging the charger. The hanging hook is not intended to support additional weight. Do not hang
anything additional to the charger or risk of breakage may occur.
TROUBLESHOOTING
Unit Is Not Charging
• Check that the charger is properly connected to a live 120 volt AC outlet.
• Make sure all connections are secure and correct.
• Make sure the Battery Clamps are NOT connection to 36 volt or 48 volt batteries or battery groups.
• The unit may have shut down because thermal protection has activated after a long period of operation. Unplug the charger and allow
the unit to cool down for several minutes. Make sure there is adequate ventilation around the unit before attempting to charge again.
• If the battery to be charged has fallen below 2 volts, the battery cannot be recharged with this unit.
CARE AND MAINTENANCE
• Store the unit in a clean, dry, cool place when not in use.
• Clean the unit casing and cords (as necessary) with a dry (or slightly damp) cloth. Ensure that unit is completely disconnected from
battery and power source before cleaning.
• To maintain the operating condition and maximize the life of the charger cords, always coil them loosely for storage. Do not crimp them
with a tight band.
ACCESSORIES
Recommended accessories for use with this unit may be available from the manufacturer. If you need assistance regarding accessories,
please contact the manufacturer at 1-877-571-2391.
WARNING: The use of any accessory not recommended for use with this appliance could be hazardous.
SERVICE INFORMATION
Whether you need technical advice, repair, or genuine factory replacement parts, contact the manufacturer at 1-877-571-2391.
ONE-YEAR LIMITED WARRANTY
The manufacturer warrants this product against defects in materials and workmanship for a period of ONE (1) YEAR from the date of
retail purchase by the original end-user purchaser ("Warranty Period").
If there is a defect and a valid claim is received within the Warranty Period, the defective product can be replaced or repaired in the
following ways: (1) Return the product to the manufacturer for repair or replacement at manufacturer's option. Proof of purchase may
be required by manufacturer. (2) Return the product to the retailer where product was purchased for an exchange (provided that the
store is a participating retailer). Returns to retailer should be made within the time period of the retailer's return policy for exchanges
only (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy
regarding returns that are beyond the time set for exchanges.
This warranty does not apply to accessories, bulbs, fuses and batteries; defects resulting from normal wear and tear, accidents; damages
sustained during shipping; alterations; unauthorized use or repair; neglect, misuse, abuse; and failure to follow instructions for care and
maintenance for the product.
11
12/8/2016 3:36:00 PM
Tabla de contenido
