Troubleshooting - Beurer LR 210 Manual De Instrucciones

4. Place the new filter assembly into the air purifier with the pre-filter facing
outwards.
5. Reattach the front cover.
6. Reconnect the power cord to an electrical outlet and press and hold the
Power Button for about five seconds to reset the Filter Change timer.
Cleaning
Clean the housing of the air purifier with a damp cloth and a mild detergent solution. Do not use any solvents,
alcohol or other aggressive or abrasive cleaning agents, as the surface may become damaged.
Storage
If you do not plan to use the device for an extended period, clean it and store it in the original packaging in
a dry environment away from direct sunlight.
Disposal
Observe the local regulations for material disposal. Dispose of the device in accordance with local regulations.
If you have any questions, please contact the local authorities responsible for waste disposal.
9� Troubleshooting
Problem
The air cleaner will not
switch on.
Airflow is diminished.
Air Purifier is very loud.
Cause
Power Cord is not getting power
or Front Cover is not attached
correctly.
Filter is dirty or air inlet is blocked. Clean prefilter with vacuum cleaner's
Air Inlet partially blocked or filter
is clogged or not inserted prop-
erly. Air Purifier may be positioned
on an uneven surface.
Solution
Ensure Front Cover is attached prop-
erly and that the power cord is con-
nected to a working electrical outlet.
Check if Filter System Assembly
is installed properly.
brush attachment. If necessary,
replace Filter System Assembly and
ensure air inlets/outlets are unob-
structed.
Reposition Air Purifier onto a flat,
stable, level surface. Check air inlet
for obstructions. Clean/replace Filter
System Assembly.
7