Dryer Description
The front
GB
Control Panel
Model & Serial
numbers
Control panel
Programme Guide
The START/CANCEL button
programme. When you press this button there will be
one beep and the progress lights will flash to confirm
the action. If you have not set a programme, the buzzer
will beep three times. When a programme is running,
holding this button cancels the programme and stops
the dryer (see Start and Programmes).
The OPTION buttons select available options for your
selected programme (see Start and Programmes).
The Option lights indicate that the option to the left of
the light has been selected.
The Programme Guide allows you to consult a user
friendly table of the available programmes.
The Clean Filter light
every programme that it is essential to clean the filter
every time the dryer is used (see Maintenance and Care).
4
Drum
Filter
OPTION
Buttons
Option
Lights
starts a selected
gives you a reminder before
The back
Rating plate
Caution: Hot!
Clean Filter
Progress
Light
Lights
Heat
DISPLAY
Icons
The On/Off indicator light
is in use or ready to select a programme.
The ON/OFF button
this button is pressed, the dryer stops. Press again,
the dryer restarts.
The Progress lights show you the status of the
programme. As each stage of the programme starts
the corresponding light turns on.
The Heat Icons indicate the heat setting of the selected
programme. High
Does not light if a Wool, Airing or Cool Tumble
programme has been selected.
The PROGRAMMES knob sets the programme: rotate
it until the indicator is pointing to the programme you want
to select (see Start and Programmes).
Air Intake Vent
Vent Tube fitted here
START/CANCEL
Button
Indicator
PROGRAMMES
ON/OFF
Knob
Button
signals that your dryer
: If the dryer is running and
or Low
.
On/Off
Light