Attaching Accessories - Nilfisk Alto filtra vac Manual De Instrucciones

ASSEMBLY
Push the swivel joint
forward until it engages.
(Fig. 1)
SECURING THE TANK
(Fig. 2)
Place the suction unit onto
the swivel joint. Secure the
suction unit with the two
star-head bolts supplied.
SECURING THE HANDLE
(Fig. 3)
Pull up the grip on the
tank and remove the
cover. Push the holder for
the crevice nozzle onto
the handle. Secure the
handle to the tank with
the star-head bolt.
CONNECTING THE
FLOOR BRUSH (Fig. 4)
Insert the plug of the floor
brush power cable into
the plug socket on the
suction unit.
ATTACHING
ACCESSORIES
Push the crevice nozzle
into the holder on the
rear and the universal
nozzle onto the nozzle
holder on the front of the
guide tube (Fig. 5).
8
ASSEMBLING THE
ACCESSORIES
The flexible suction hose
has two different
connectors (1 hand tube
with suction force
controller, 1 hose
connector). Push the
extension onto the hand
tube with the suction force
controller (Fig. 6).
COMPLETING THE
CLEANER (Fig. 7)
1 = Push the mounting
onto the suction unit
and press the suction
hose into the guide
on the rear of the
suction unit.
2 = Press the extension
tube into the 3 =
guide on the rear of
the suction unit.
4 = Press the suction hose
into the holder above
the swivelling cable
holder.
5 = Wrap the mains lead
around the swivelling
cable holder (Fig. 2)
TILTING THE HANDLE
(Fig. 8)
Press the pedal down with
your foot and tilt the
handle.
Please note:
The floor brush is
switched off when the
cleaner is upright and
when the extension
tube is removed.
When the extension
tube is fitted again, it
must engage correctly
otherwise the floor
brush will remain
switched off.
PILE FINE
ADJUSTMENT(Fig. 9)
Three pile fine
adjustments allow
individual adaption to
extreme carpet surfaces
and to hard floor
coverings.
Normal floor
coverings
Loop pile carpets
High-pile carpets
SUCTION FORCE
CONTROL (Fig. 10)
The suction force
controller on the hand
tube allows the desired
suction force at the nozzle
to be adjusted.