Tabla de contenido
Idiomas disponibles
Idiomas disponibles
How to Use
4
Holding filter holder handle
securely, align locking tabs of
filter holder with the brew head
opening. Insert filter holder until it
slides all the way to the back and
cannot be pushed in any further.
8
(cont.)
5
Pull down on the lever handle to
lock the filter holder into place.
The lever will be locked when it
is slightly below horizontal and
cannot be pushed down any
further.
Turn the control knob to BREW
to begin the flow of espresso.
6
Plug in and press the ON/OFF
button to turn unit ON (I). The
amber ON light will illuminate.
The ready light will glow green
when the water is heated and unit
is ready for use.
9
7
Place one or two cups under
brew head spouts. If using one
cup, use one wide enough to
catch espresso from both spouts.
As espresso dispenses, it will
gradually look lighter in color.
Press ON/OFF button to turn the
unit off and to stop dispensing.
Allow espresso to drip from filter
holder for 15–20 seconds before
removing cup(s). This will make
about 1–1.5 oz. of espresso or a
total of 2–3 oz. if using the 2-cup
filter.
9
Tabla de contenido
