Before First Use - Hamilton Beach 40792 Manual De Instrucciones

Before First Use

1
Fill the removable water reservoir
to the MAX fill line with cold
water and replace securely on
the back of unit.
5
6
(Priming the Pump)
2
Plug in the unit and press the
ON/OFF button to turn unit
ON (I). The amber ON light will
illuminate.
Allow steam to flow for about
2 minutes. NOTE: After the ready
light initially glows green, the
light may cycle on and off during
operation.
NOTICE: The water pump must be "primed" before
first use to work properly. Operating without water in
the reservoir can permanently damage the appliance.
3
The ready light will glow green
when the water is heated and unit
is ready for use. Place an empty
container under frothing nozzle in
order to catch any drips of water
from the steam nozzle.
6
4
Turn the control knob to the
STEAM setting. Steam will
begin to flow from the steam
nozzle.
Turn the control knob back to the
STANDBY position.