Midea MDT24H3AST Manual De Instrucciones página 24

3.
Install a UL listed/CSA approved strain relief.
4.
Route the direct wire cable in the channel on the right-hand side of the
dishwasher base. Make sure that the dishwasher is not resting on and/
or pinching the wire.
5.
Pull direct wire through strain relief in terminal box.
a
6.
Connect the wires as follows using UL listed wire nuts of the
appropriate size to connect direct wire to 16-gauge dishwasher wire.
NOTES:
•
Use UL listed wire nuts of the appropriate size
to connect your household wiring to 16-gauge
dishwasher wiring.
•
Insert wire ends into twist on connector. Do not
pre-twist bare wire.
•
Twist connector.
•
Gently tug on wires to be sure both wires are
secured.
a
24
7.
Tighten strain relief screws to secure cord.
8.
Reinstall terminal box cover with wire nuts inside terminal box.
9.
Make sure wires are not pinched by cover.
a
Power supply wire:
white
black
ground wire
b
c
b
c
a
Strain Relief
Terminal box wire:
white
black
ground connector
a
b
c
a
b
c
Ground
White
Black
Ground
White
Black