Connect To Power Supply - Midea MDT24H3AST Manual De Instrucciones

5.
Place level on door and rack track inside the tub as shown. Check that
dishwasher is level from side to side, and from back to front. If the
dishwasher is not level, adjust front legs up or down until dishwasher is
level.
a
NOTE: Pull lower rack out about halfway. If the rack rolls forward or back
into the dishwasher, the dishwasher must be leveled again.

CONNECT TO POWER SUPPLY

DIRECT WIRE CABLE
WARNING
Electrical Shock Hazard
•
Electrically ground dishwasher.
•
Connect ground wire to green ground connector in
terminal box.
•
Do not use an extension cord.
•
Failure to follow these instructions can result in death,
fire, or electrical shock.
IMPORTANT: Contact a qualified electrician. Be sure that the electrical
connection and wire size are adequate and in conformance with the
National Electrical Code, ANSI/NFPA No. 70-latest edition and all local
codes and ordinances.
1.
Confirm that power is turned off at the source.
2.
Remove terminal box cover. Retain for later use.
a
Level Front to Back
b
Level Side to Side
b
23