Kohler K-6534-4 Instrucciones De Instalación página 6

3 or 4 Faucet Holes
1-1/2" (3.8cm) Min.
2" R. Max.
(Sharp Corner
Optional)
Cut-out
Countertop
31"
(78.7cm)
Min. Cut-out If Using
K-5984 Cutting Board
Fig. #11
1015927-2-B
Finished Wall
"Y"
Sink
7.
Drill required faucet hole locations (number of holes drilled will be
determined by the fitting being used) and install faucet to
countertop according to manufacturer's instructions.
8.
Clean the top of the sink rim, making sure surface is free from
debris. Clean the bottom of the countertop around the cut-out
area, making sure surface is smooth and free of defects.
9.
Apply a generous bead of sealant around the sink rim (where sink
rim and countertop meet).
10.
Position the countertop over the sink, being careful the sealant
provides a complete seal between sink rim and bottom of
countertop. Immediately wipe away any excess sealant with a
damp cloth. Fill any voids between rim and countertop with
sealant.
11.
Sealing gap between apron and cabinet is optional.
6
Kohler Co.