Tabla de contenido
Idiomas disponibles
Idiomas disponibles
beam, please observe all safety rules as follows:
1. The laser shall be used and maintained in accordance with the manufacturer's instructions.
2. Never aim the beam at any person or an object other than the work piece.
3. The laser beam shall not be deliberately aimed at another person and shall be prevented from
being directed towards the eye of a person for longer than 0.25 seconds area.
4. Always ensure the laser beam is aimed at a sturdy work piece without reflective surfaces, e.g.
wood or rough-coated surfaces are acceptable. Bright shiny reflective sheet steel or similar is
not suitable for laser applications as the reflective surface may direct the laser beam back at the
operator.
5. Do not change the laser device with a different type. The manufacturer or an authorized agent
must carry out repairs.
6. CAUTION: Use of controls or adjustments other than those specified herein may result in
hazardous radiation exposure.
ADDITIONAL SAFETY WARNING FOR CLASS 2 LASER
The laser device fitted to this tool is CLASS 2 with a maximum radiation of XXX mW and XXX
nm wavelength.
CLASS 2 LASER RADIATION, DO NOT STARE INTO BEAM
33
Tabla de contenido
