Important Notices - Pentair MASTERTEMP 125 Guía De Instalación Y Usuario

Ocultar thumbs Ver también para MASTERTEMP 125:

Tabla de contenido

Idiomas disponibles

Section 2: Warning and Safety Instructions

Congratulations on your purchase of a MasterTemp

service of your new heating system and correct chemical maintenance of the water will ensure years of enjoyment. The

125 heater is a compact, lightweight, efficient, induced-draft, gas fired high performance pool and spa heater

MasterTemp

that can be directly connected to schedule 40 PVC pipe. The heater also comes equipped with the Pentair multifunction

temperature controller which shows, at a glance, the proper functioning of the heater. All MasterTemp

designed with a direct ignition device, HSI (hot-surface ignition), which eliminates the need for a standing pilot. The

125 heater requires an external power source (120/240 VAC 60 Hz) to operate.

MasterTemp

SPECIAL INSTRUCTIONS TO OWNER: Retain this manual for future reference. This instruction manual provides

operating instructions, installation and service information for the MasterTemp

information in this manual applies to all MasterTemp

COMPLETELY, it is very important that the owner/installer read and understand the section covering installation

instructions, and recognize the local and state codes before installing the MasterTemp

service calls and chance of injury and will lengthen product life. History and experience has shown that most heater

damage is caused by improper installation practices.

IMPORTANT NOTICES

...For the installer and operator of the MasterTemp

if, for any reason, the heater is improperly installed and/or operated. Be sure to follow the instructions set forth in this

manual. If you need any more information, or if you have any questions regarding to this pool heater, please contact

Pentair Aquatic Systems at (800) 831-7133.

HEATER APPLICATION INFORMATION

The MasterTemp 125 pool heater is sold with a limited factory warranty. Pentair Water Pool and Spa high standards

of excellence include a policy of continuous product improvement resulting in your state-of-the-art heater. We

reserve the right to make improvements which change the specifications of the heater without incurring an obli-

gation to update the current heater equipment.

The heater is designed for the heating of chlorine, bromine or salt system swimming pools and spas or in non-

stationary installations, and should never be employed for use as space heating boilers or general purpose water

heaters. The manufacturer's warranty may be void if, for any reason, the heater is improperly installed and/or

operated. Be sure to follow the instructions set forth in this manual.

OPERATING THIS HEATER CONTINUOUSLY AT WATER TEMPERATURE BELOW 20° C (68° F). WILL CAUSE HARMFUL

CONDENSATION AND WILL DAMAGE THE HEATER AND VOID THE WARRANTY. Do not use the heater to protect pools

or spas from freezing if the final maintenance temperature desired is below 20° C (68° F), as this will cause condensation

Tabla de contenido