CARATTERISTICHE TECNICHE
TECHNICAL CHARACTERISTICS
CARACTÉRISTIQUES TECHNIQUES
Per garantire la protezione richiesta, lo strumento deve essere installato in contenitore con grado di protezione minimo IP51 (IEC/EN 60529). -
protection requirements the meter must be mounted in a class IP51 enclosure or better (IEC/EN 60529). - Pour se conformer aux exigences de protection, le compteur doit
être monté dans un boîtier de classe IP51 ou mieux - Para cumplir con los requisitos de protección, el medidor debe montarse en un gabinete de clase IP51 o mejor - Um die
Schutzanforderungen zu erfüllen, muss das Messgerät in ein Gehäuse der Schutzklasse IP51 oder besser eingebaut werden
Voltage
Nominal voltage Us
Operating voltage range
Nominal frequency
Operating frequency range
Power consumption/dissipation
Current
Minimum current (Imin)
Transition current (Itr)
Reference current (Iref - Ib)
Max current (Imax)
Start current (Ist)
Accuracy
Active energy (EN 50470-3)
LED pulse
Integration constant
Pulse lenght
RS485 interface
RS485 Serial interface type
Baud-rate
Termination resistor
Ambient operating conditions
Mounting
Operating temperature
Storage temperature
Relative humidity
Maximum pollution degree
Overvoltage category
Altitude
Climatic sequence
Shock resistance
Vibration resistance
Mechanical environment
Electromagnetic environment
Insulation voltage
Rated insulation voltage Ui
Rated impulse withstand voltage Uimp
Power frequency withstand voltage
Supply / measure connections
Terminal type
Number of terminals
Cable cross section (min... max)
Tightening torque
RS485 connections
Terminal type
Number of terminals
Cable cross section (min... max)
Tightening torque
Housing
Version
Mounting
Material
Degree of protection
Weight
Certifications and compliance
Certifications
Comply with standards
To comply with the protection requirements the meter must be mounted in a class IP51 enclosure or better. (IEC/EN 60529).
CARACTERÍSTICAS TÉCNICAS
TECHNISCHE MERKMALE
~
230V
~
187 – 264V
50Hz
45 - 66Hz
1VA / 0.4W
0.25A
0.5A
5A
40A
20mA
Class B
1000 pulses / kWh
30ms
Opto-isolated
programmable 1200...38400 bps
External – 120 Ohm
Indoor use only
-25...+70°C
-25...+70°C
<80% non-condensing (IEC/EN 60068-2-78)
2
III
≤2000m
Z/ABDM (IEC/EN 60068-2-61)
10g (IEC/EN 60068-2-27)
0.7g (IEC/EN 60068-2-6)
Class M1
Class E2
~
250V
6kV
4kV
Screw (fixed)
4
2
1.5 - 10mm
(16-6AWG )
1.5Nm (14lbin)
Screw (fixed)
2
2
0.2 - 4mm
(24-12AWG )
0.8Nm (7lbin)
1 module (DIN 43880)
35mm DIN rail (EN 60715) or by screw using extractible clips
Polyamide RAL 7035
IP40 on front
90g
EAC
EN 50470-1, EN 50470-3, TR 50579
To comply with the
11
