Gallagher HR3 Instrucciones página 21

Connec ng to the Scale
When opera ng in Non-memory mode, you need to setup how the read Electronic ID tag
data is to be transferred to a Scale.
There are two methods:
• Bluetooth (wireless), see Bluetooth to Scale (p 21).
• Data and power cable, see Data and power cable to Scale (p 22).
Once you have set up the connec on you need to test the connec on, see Tes ng the
connec on between Scale and HR
Note: You can also connect to a computer or other data logging device.
See "Connec ng the HR3 Reader to the computer" in the SmartReader Confi gurator Help.
Se ng up the Scale
Consult the User Manual supplied with your scale. It is likely you will have to set the me
and date and assign a communica ons port (the Gallagher HR3 Reader connects to COM 2
on the Gallagher Scale).
Bluetooth to Scale
1. Using the short Serial cable, plug the supplied Bluetooth to
RS232 adaptor into the Scale (On a Gallagher Scale connect
to Port 2).
Consult the scale User Manual to turn on the Scale and set it
up to receive the Electronic ID tag data.
Note: Check that the switch on the side of the adaptor is set
to the furthest posi on, (i.e. 'PoRI' on some adaptors), from
the DB9 adaptor.
2. Ac vate the HR3 Reader or access the Bluetooth connec on
screen via the Click Trigger menu. The Reader screen
ac vates and the following screen displays:
Hand Held Reader (p 23).
3
21