Light Kit Assembly (Optional) - Craftmade Limerick LIM60 Guia De Instalacion

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

9. Light Kit Assembly (Optional).

If you wish to use the light kit, remove 3 screws
from underside of fitter plate and save them for
later use.
Connect male plug from motor housing to
female plug from LED light kit, matching up the
colors on the male plug with the colors on the
female plug for correct fit. Be sure that plugs
connect securely.
Carefully arrange wiring within fitter plate.
Align holes in LED light kit with holes in fitter
plate. Re-insert screws that were previously
removed and securely tighten all 3 screws
with a Phillips screwdriver. [Refer to diagram 1.]
Locate slots on shade and align with nodules on
inside of fitter plate.
Gently push up on shade and
turn
to the RIGHT (clockwise)
completely into place.
[Refer to diagram 2.]
If you do NOT wish to use the light kit,
slots on metal cover and align with nodules on
inside of fitter plate. Gently push up on metal
cover and turn to the
RIGHT (clockwise)
slides completely into place.
CAUTION:
Do not install the LED light kit if you
do NOT wish to use the light.
until it slides
locate
until it
[Refer to diagram 3.]
page 8
motor housing
fitter plate
LED light kit
diagram 1
motor housing
nodules
slots
diagram 2
motor housing
nodules
slots
diagram 3
male
plug
female
plug
shade
metal cover

Capítulos

Tabla de contenido
loading

Tabla de contenido