ALI PCGV92Q Instrucciones Para Instalación, Uso Y Mantenimiento página 84

• Do not obstruct any air vents or drains pre-
sent on the appliance.
• Do not tamper with appliance components.
• Do not pour water in the container when it
is empty and hot, as the burners may go
out.
• The use of personal safety equipment is
recommended - risk of very hot food being
scattered.
• During appliance operation, the floor sur-
rounding the appliance may become slip-
pery: exercise caution and take all suitable
measures to prevent falls.
• Take care when handling accessories (e.g.
pans) and movable parts of the appliance
to use the correct posture.
• Appliances of this type are intended for
use in commercial applications such as,
for example, the kitchens of restaurants,
canteens, hospitals and businesses such
as bakers, butchers etc., but they are not
intended for the continuous mass produc-
tion of food.
USING THE GAS HOB
REMINDERS FOR USE
• The appliance is designed for cooking foods contained in
pots and pans.
• The pilot burners have to be turned on manually.
• Check that the flame spreaders are correctly placed on the
burners.
• Check that the pan support grilles are positioned correctly.
• Use pots with a diameter between 150 and 300 mm on the
3.5 kW burner.
• Use pots with a diameter between 150 and 380 mm on the
5.7 kW burner.
• Use pots with a diameter between 150 and 420 mm on the
7 kW burner.
• Use pots with a diameter between 150 and 500 mm on the
10 kW burner.
BURNER IGNITION AND EXTINCTION
The gas tap control knob has the following positions:
Off
Pilot ignition
Minimum flame
Maximum flame
Pilot ignition
Press and turn the knob to position "
• Press the knob down fully and light the pilot with a flame.
8
• Hold the knob down for about 20 seconds before releasing it.
Main burner ignition
Turn the knob from position "
Next, depending on cooking requirements, turn the knob to any
position between "
Switching off
To switch the main burner off, turn the knob to position "
To switch off the pilot flame, press and turn the knob to position
"
USING THE SOLID TOP HOB/SIMPLE SERVICE
REMINDERS FOR USE
• The appliance is designed for cooking foods contained in
• The highest temperatures are in the center of the hotplate.
• Check that the flame spreaders are correctly placed on the
BURNER IGNITION AND EXTINCTION
Pilot ignition
Press and turn the knob to position "
• Press the knob down fully and light the pilot using the piezo-
• Hold the knob down for about 20 seconds before releasing it.
• The pilot flame can be seen through the peep hole on the
• The pilot burner can be lit with a flame. Raise the central disc
The gas tap control knob has the following positions:
Main burner ignition
Turn the knob from position "
Next, depending on cooking requirements, turn the knob to any
position between "
Switching off
To switch the main burner off, turn the knob to position "
To switch off the pilot flame, press and turn the knob to position
"
USING THE GAS OVEN
".
REMINDERS FOR USE
• The appliance is designed for cooking foods placed on the
If the pilot flame goes out, repeat the operation.
" and "
".
pots and pans.
burners.Raise the central disc on the hotplate.
electric igniter.
If the pilot flame goes out, repeat the operation.
control panel.
on the hotplate.
Off
Pilot ignition
Minimum flame
Maximum flame
" and "
".
grilles provided.
" to " ".
".
".
" to " ".
".
".
".