Rock Shox BOXXER RACE Guía De Ajuste Rápido página 8

XX
Bo er race tuning guide
Use a ruler to measure the distance from the top of the coil spring
6
to the top of the upper tube. This distance should be at least 14 mm
but not more than 16 mm. If the measurement is greater than
16 mm, add preload spacers until the measurement falls between
14-16 mm (each preload spacer is 2 mm thick).
note: If the distance measures greater than 16 mm and is not
corrected, the coil spring will experience up/down play in the
upper tube and the fork will make a 'knocking' noise. If the
distance is less than 14 mm, the coil spring will bind in the upper
tube which can lead to damage of the coil spring.
Insert the top cap into the crown and hand thread it into the upper
7
tube. Be careful not to damage the top cap o-ring upon installation.
Use a 24 mm socket wrench and tighten the top cap to 7.3 N∙m
8
(65 in-lb).
8
6
14-16 mm
7
8
Copyright © SRAM Corporation • 2009